Whirlpool ADN 216 Instruction for Use

Operating Instruction ADN 213, ADN 214, ADN 215, ADN 216, A

MACHINE STATUS MENU To access the “Machine Status” menu Press and quickly release the “set” key. If alarms are not present, the label “SEt” appears. B

PROGRAMMING MENU To enter the “Programming” menu, press the “set” key for more than 5 seconds. If specified, the access PASSWORD will be requested, (p

PARAMETRES visibles uniquement sur les modeles dotes d’entrée numerinque (Digital input) PAR. DESCRIPTION OAO Retard signalization alarme ap

Parameters PAR. RANGE U.M LEVEL ADN 213 ADN 218 ADN 214 ADN 219 ADN 216 Dif 0.1...30.0 ºc/ºf 1 2 2 2 2 2 HSE LSE...302 ºC/ºF 1

Parameters PAR. RANGE U.M LEVEL ADN217 ADN215 ADN220 Dif 0.1...30.0 ºc/ºf 1 2 2 2 HSE LSE...302 ºC/ºF 1 -5 10 10 LSE -55.0...H

9. DEVICE MAINTENANCE Before commencing any maintenance or cleaning activities, switch the device off, and then remove the plug from power outlet!!!

12. PROPER EXPLOITATION RULES OF REFRIGERATION DEVICE 1. Connect the device only do the zeroed mains outlet. 2. Place the device in a proper distance

Table of Contents: 1. INTRODUCTION...

1. INTRODUCTION Refrigerating devices like: cases, glass cases, tables are designed for storing of previously cooled food products, to display the

3. REMARKS CONCERNING SAFETY AND PROPER OPERATION The device is designed to be operated by adults only. The child play in the vicinity of the working

4. PROPER OPERATION OF THE DEVICE Refrigerating devices can be exploited in a ventilated room in the following environment temperature r

5. DATA / TECHNICAL FEATURES Tables enclosed. 6. GENERAL DESCRIPTION OF THE DEVICE 1. Refrigerator cases (full door) are designed for short-t

Unpacking Instructions • Any damage should be immediately reported to the carrier. • The appliance should be unpacked immediately to check t

5. Before commencing any maintenance or cleaning activities, switch the device off, and then remove the plug from power outlet. The device is sta

The user has a display and four keys for controlling status and programming of the instrument. At start-up the instrument performs a Lamp Test; for