Whirlpool M8TXEGFBB Dimensions Guide download pdf

PRODUCT MODEL NUMBER

PRODUCT DIMENSIONS

M8TXEGFB

Electrical: A 115-volt, 60-Hz, AC-only, 15- or

20-amp fused, grounded electrical supply is

required. It is recommended that a separate

circuit serving only your refrigerator be

provided. Use an outlet that cannot be turned

off by a switch. Do not use an extension cord.

NOTE: Before performing any type of

installation, cleaning, or removing a light bulb,

turn the control (Thermostat, Refrigerator or

Freezer Control depending on the model) to OFF

and then disconnect the refrigerator from the

electrical source. When you are finished,

reconnect the refrigerator to the electrical

source and reset the control (Thermostat,

Refrigerator or Freezer Control depending on

the model) to the desired setting. See “Using

the Controls.”

Water: A cold water supply with water

pressure between 30 and 120 psi (207 and 827

kPa) is required to operate ice maker and water

dispenser. If you have questions about your

water pressure, call a licensed, qualified

plumber.

IMPORTANT: The pressure of the water coming

out of a reverse osmosis system going to the

water inlet valve of the refrigerator needs to be

between 30 and 120 psi (207 and 827 kPa).

Reverse Osmosis Water Supply: If a reverse

osmosis water filtration system is connected to

your cold water supply, the water pressure to

the reverse osmosis system needs to be a

minimum of 40 to 60 psi (276 to 414 kPa).

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10551695A

1/31/14

2 " (1.25 cm)

2" (5.08 cm)

(1.25 cm)

IMPORTANT: This refrigerator is designed for indoor household use only.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) of space on

each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If

your refrigerator has an ice maker, allow extra space at the back for the water line

connections. When installing your refrigerator next to a fixed wall, leave a 2" (5.08 cm)

minimum space on the hinge side (some models require more) to allow the door to

swing open.

NOTE: This refrigerator is intended for use in a location where the temperature ranges

from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room

temperature range for optimum performance, which reduces electricity usage and

provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is

recommended that you do not install the refrigerator near a heat source, such as an

oven or radiator.

Top Mount Refrigerator

LOCATION REQUIREMENTS

Model Size

Height -

Overall

“A”

Height -

Top of

Cabinet

“B”

Depth -

Door Open

90°

“C”

Depth -

With

Handles

“D”

Depth -

Without

Handles

“E”

Depth -

Cabinet

Only

“F”

Width -

Cabinet

“G”

18.5 cu.ft.

⁄

(168.3 cm)

⁄

(166.4 cm)

59¹⁄₄"

(150.5 cm)

⁄

(83.2 cm)

⁄

(77.8 cm)

⁄

(72.4 cm)

29¹⁄₂"

(74.9 cm)

overall

top of

cabinet

not incl.

handle

incl.

handle

90˚

cabinet

Top Mount Refrigerator 1

Summary of Contents

Page 1 - Top Mount Refrigerator

PRODUCT MODEL NUMBERPRODUCT DIMENSIONSM8TXEGFBElectrical: A 115-volt, 60-Hz, AC-only, 15- or20-amp fused, grounded electrical supply isrequired. It is

Comments to this Manuals

No comments

Whirlpool M8TXEGFBB Dimensions Guide

Browse online or download Dimensions Guide for Fridges Whirlpool M8TXEGFBB. Whirlpool M8TXEGFBB Dimension Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Fridges Whirlpool M8TXEGFBB