Whirlpool MFB2055YEB Dimensions Guide download pdf

PRODUCT MODEL NUMBER

PRODUCT DIMENSIONS

MFB2055YE

Electrical: A 115-volt, 60-Hz, AC-only, 15- or

20-amp fused, grounded electrical supply is

required. It is recommended that a separate

circuit serving only your refrigerator be

provided. Use an outlet that cannot be turned

off by a switch. Do not use an extension cord.

NOTE: Before performing any type of

installation, cleaning, or removing a light bulb,

turn the control (Thermostat, Refrigerator or

Freezer Control depending on the model) to

OFF and then disconnect the refrigerator from

the electrical source. When you are finished,

reconnect the refrigerator to the electrical

source and reset the control (Thermostat,

Refrigerator or Freezer Control depending on

the model) to the desired setting. See “Using

the Controls.”

Water: A cold water supply with water

pressure between 30 and 120 psi (207 and

827 kPa) is required to operate ice maker and

water dispenser. If you have questions about

your water pressure, call a licensed, qualified

plumber.

IMPORTANT: The pressure of the water

coming out of a reverse osmosis system

going to the water inlet valve of the

refrigerator needs to be between 30 and

120 psi (207 and 827 kPa).

Reverse Osmosis Water Supply: If a reverse

osmosis water filtration system is connected

to your cold water supply, the water pressure

to the reverse osmosis system needs to be a

minimum of 40 to 60 psi (276 to 414 kPa).

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10460643B

1/31/14

2" (5.08 cm)

¹⁄₂" (1.25 cm)

To ensure proper ventilation for your refrigerator, allow for a ¹⁄₂" (1.25 cm) of space on

each side and at the top. Allow for a 1" (2.54 cm) space behind the refrigerator. If your

refrigerator has an ice maker, allow extra space at the back for the water line

connections. When installing your refrigerator next to a fixed wall, leave a 2" (5.08 cm)

minimum space between the refrigerator and wall to allow the door to swing open.

NOTE: This refrigerator is intended for use in a location where the temperature ranges

from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room

temperature range for optimum performance, which reduces electricity usage and

provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended

that you do not install the refrigerator near a heat source, such as an oven or radiator.

Bottom Mount Refrigerator

LOCATION REQUIREMENTS

Model

Size

Height -

Overall

“A”

Height -

Top of

Cabinet

“B”

Depth -

Doors Open

90°

“C”

Depth -

Drawer

Open

“D”

Depth -

With

Handles

“E”

Depth -

Without

Handles

“F”

Depth -

Cabinet

Only

“G”

Width -

Cabinet

“H”

Width -

Door Open

90°

“I”

19.6 cu.ft.

68¹⁄₂"

(174 cm)

67¹⁄₂"

(171.5 cm)

43⁵⁄₈"

(110.8 cm)

51¹⁵⁄₁₆"

(131.9 cm)

34³⁄₄"

(88.3 cm)

31¹¹⁄₁₆"

(80.5 cm)

27⁷⁄₈"

(70.8 cm)

29¹⁄₂"

(74.9 cm)

37⁵⁄₈"

(95.6 cm)

overall

top of

cabinet

not incl.

handle

incl.

handle

cabinet

90˚90˚

Bottom Mount Refrigerator 1

Summary of Contents

Page 1 - Bottom Mount Refrigerator

PRODUCT MODEL NUMBERPRODUCT DIMENSIONSMFB2055YEElectrical: A 115-volt, 60-Hz, AC-only, 15- or20-amp fused, grounded electrical supply isrequired. It i

Comments to this Manuals

No comments

Whirlpool MFB2055YEB Dimensions Guide

Browse online or download Dimensions Guide for Fridges Whirlpool MFB2055YEB. Whirlpool MFB2055YEB Dimension Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Fridges Whirlpool MFB2055YEB