Whirlpool WRF954CIHZ Dimensions Guide

Browse online or download Dimensions Guide for Fridges Whirlpool WRF954CIHZ. Whirlpool WRF954CIHZ Dimensions Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
French Door w/Ice Dispenser Refrigerator
WRF954CIH WRF964CIH
WRFA94CIH
Electrical: A 115-volt, 60 Hz, AC-
only 15- or 20-amp fused, grounded
electrical supply is required. It is
recommended that a separate circuit
serving only your refrigerator and
approved accessories be provided.
Use an outlet that cannot be turned
off by a switch. Do not use an
extension cord.
Water: A cold water supply with
water pressure between 35 and
120 psi (241 and 827 kPa) is
required to operate the water
dispenser and ice maker. If you
have questions about your water
pressure, call a licensed, qualied
plumber.
NOTE: If the water pressure is less
than what is required, the ow of
water from the water dispenser
could decrease or ice cubes could
be hollow or irregular shaped.
Reverse Osmosis Water Supply:
IMPORTANT: The pressure of
the water supply coming out of a
reverse osmosis system going to the
water inlet valve of the refrigerator
needs to be between 35 and 120 psi
(241 and 827 kPa).
If a reverse osmosis water ltration
system is connected to your cold
water supply, the water pressure to
the reverse osmosis system needs
to be a minimum of 40 to 60 psi
(276 to 414 kPa).
IMPORTANT: This refrigerator is designed for indoor, household use only.
To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) of
space on each side and at the top. Allow for a 1" (2.54 cm) space behind the
refrigerator. If your refrigerator has an ice maker, allow extra space at the back
for the water line connections. When installing your refrigerator next to a xed
wall, leave a 3¾" (9.5 cm) minimum space between the refrigerator and wall to
allow the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum performance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and
90°F (32°C). It is recommended that you do not install the refrigerator near a
heat source, such as an oven or radiator.
LOCATION REQUIREMENTS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10913493B
03/17
Model
Size
Height -
Overall
“A”
Height -
Top of
Cabinet
“B”
Depth -
Door
Open
90°
“C”
Depth -
Drawer
Open
“D”
Depth -
With
Handles
“E”
Depth -
Without
Handles
“F”
Depth -
Cabinet
Only
“G”
Width -
Cabinet
“H”
Width -
Door
Open
90°
“I”
23.8 cu. ft
71
7
/
8
"
(182.6 cm)
70
7
/
8
"
(180.0 cm)
43
3
/
4
"
(111.1 cm)
45
7
/
8
"
(116.5 cm)
31
1
/
2
"
(80.0 cm)
28
7
/
8
"
(73.3 cm)
24
3
/
8
"
(61.9 cm)
35
13
/
16
"
(91.0 cm)
43
5
/
8
"
(110.8 cm)
PRODUCT MODEL NUMBER PRODUCT DIMENSIONS
MFT2778EE
Electrical: A 115-volt, 60-Hz, AC-only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned
off by a switch. Do not use an extension
cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat,
Refrigerator or Freezer Control depending on
the model) to OFF and then disconnect the
refrigerator from the electrical source. When
you are finished, reconnect the refrigerator to
the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See “Using the Controls.
Water: A cold water supply with water
pressure between 30 and 120 psi (207 and
827 kPa) is required to operate ice maker
and water dispenser. If you have questions
about your water pressure, call a licensed,
qualified plumber.
IMPORTANT: The pressure of the water
coming out of a reverse osmosis system
going to the water inlet valve of the
refrigerator needs to be between 30 and
120 psi (207 and 827 kPa).
Reverse Osmosis Water Supply: If a
reverse
osmosis water filtration system is
connected to your cold water supply
, the
water pressure to the reverse osmosis
system needs to be a minimum of 40 to
60 psi (276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10739699A
05/15
French Door with Ice Dispenser Refrigerator
Model
Number
Model
Size
Height -
Overall
“A”
Height -
Top of
Cabinet
“B”
Depth -
Doors
Open 90°
“C”
Depth -
Drawer
Open
“D”
Depth -
With
Handles
“E”
Depth -
Without
Handles
“F”
Depth -
Cabinet
Only
“G”
Width -
Cabinet
“H”
Width -
Door Open
90°
“I”
MFT2778EE 26.8 cu. ft.
70"
(177.8 cm)
68⁵⁄"
(174.3 cm)
48"
(121.9 cm)
47³⁄"
(121.3 cm)
35⁵⁄"
(90.5 cm)
33¹⁄"
(84.1 cm)
28
7
"
(73.3 cm)
35
7
"
(91.1 cm)
38³⁄₁"
(97.0 cm)
LOCATION REQUIREMENTS
3³⁄₄" (9.5 cm)
¹⁄₂" (1.25 cm)
To ensure proper ventilation for your refrigerator, allow for a
1
2" (1.25 cm) space on
each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If
your refrigerator has an ice maker, make sure you leave some extra space at the
back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 3
3
4" (9.5 cm)
minimum on the hinge side (depending on your model) to allow for the door to
swing open.
NOTE: This refrigerator is intended for use in a location where the temperature
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum per
formance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator near a heat source,
such as an oven or radiator.
A
overall
B
top of
cabinet
H
not incl.
handle
F
incl.
handle
E
D
cabinet
G
90˚90˚
C
I
PRODUCT MODEL NUMBER PRODUCT DIMENSIONS
MFT2778EE
Electrical: A 115-volt, 60-Hz, AC-only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned
off by a switch. Do not use an extension
cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat,
Refrigerator or Freezer Control depending on
the model) to OFF and then disconnect the
refrigerator from the electrical source. When
you are finished, reconnect the refrigerator to
the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See “Using the Controls.
Water: A cold water supply with water
pressure between 30 and 120 psi (207 and
827 kPa) is required to operate ice maker
and water dispenser. If you have questions
about your water pressure, call a licensed,
qualified plumber.
IMPORTANT: The pressure of the water
coming out of a reverse osmosis system
going to the water inlet valve of the
refrigerator needs to be between 30 and
120 psi (207 and 827 kPa).
Reverse Osmosis Water Supply: If a
reverse
osmosis water filtration system is
connected to your cold water supply
, the
water pressure to the reverse osmosis
system needs to be a minimum of 40 to
60 psi (276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10739699A
05/15
French Door with Ice Dispenser Refrigerator
Model
Number
Model
Size
Height -
Overall
“A”
Height -
Top of
Cabinet
“B”
Depth -
Doors
Open 90°
“C”
Depth -
Drawer
Open
“D”
Depth -
With
Handles
“E”
Depth -
Without
Handles
“F”
Depth -
Cabinet
Only
“G”
Width -
Cabinet
“H”
Width -
Door Open
90°
“I”
MFT2778EE 26.8 cu. ft.
70"
(177.8 cm)
68⁵⁄"
(174.3 cm)
48"
(121.9 cm)
47³⁄"
(121.3 cm)
35⁵⁄"
(90.5 cm)
33¹⁄"
(84.1 cm)
28
7
"
(73.3 cm)
35
7
"
(91.1 cm)
38³⁄₁"
(97.0 cm)
LOCATION REQUIREMENTS
3³⁄₄" (9.5 cm)
¹⁄₂" (1.25 cm)
To ensure proper ventilation for your refrigerator, allow for a
1
2" (1.25 cm) space on
each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If
your refrigerator has an ice maker, make sure you leave some extra space at the
back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 3
3
4" (9.5 cm)
minimum on the hinge side (depending on your model) to allow for the door to
swing open.
NOTE: This refrigerator is intended for use in a location where the temperature
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum performance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator near a heat source,
such as an oven or radiator.
A
overall
B
top of
cabinet
H
not incl.
handle
F
incl.
handle
E
D
cabinet
G
90˚90˚
C
I
Page view 0
1

Summary of Contents

Page 1 - ¹⁄₂" (1.25 cm)

PRODUCT MODEL NUMBERSPRODUCT DIMENSIONSFrench Door w/Ice Dispenser RefrigeratorWRF954CIH WRF964CIHWRFA94CIHElectrical: A 115-volt, 60 Hz, AC-only 15-

Comments to this Manuals

No comments