Whirlpool WRS588FIHZ Dimensions Guide

Browse online or download Dimensions Guide for Fridges Whirlpool WRS588FIHZ. Whirlpool WRS588FIHZ Dimension Guide [ru] User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Bottom Mount Refrigerator
PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS
WRS588FIH
Electrical: A 115-volt, 60-Hz, AC-only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your r efrigerator be
provided. Use an outlet that cannot be turned
off by a swit ch. Do not use an extensi on
cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat,
Refrigerator or Freezer Control depending on
the m odel) to OFF and then disconnect the
refrigerator from the electrical source. When
you are finished, reconnect the refrigerator to
the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See Using the Controls.
Water: A cold wat er supply with water
pressure between 30 and 120 psi (207 and
827 kPa) is r
equired to operate ice maker
and water dispenser. If you have questions
about your w ater pressure, call a licensed,
qualified plumber.
IM PORTANT: The pressure of the water
coming out of a reverse osmosis system
going to the water inlet valve of the
refrigerator needs to be between 30 and
120 psi (207 and 827 kP a).
Reverse Osmosis Water Supply: If a
reverse osmosis water filtration system is
connected to y our cold water supply, the
water pressure to the reverse osmosis
system needs to be a minimum of 40 to
60 psi (276 to 414 kPa).
LOCATION REQUIREMENTS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10768947A
1/17
To ensure proper ventilation for your refrigerator, allow for a
1
2" (1.27 cm) space on
each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If
your refrigerator has an ice maker, make sure you leave some extra space at the
back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2" (5.08 cm)
minimum on the hinge side (depending on your model) to allow for the door to
swing open.
NOTES: This refrigerator is intended for use in a location where the temperature ranges from
a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature
range for optimum performance, which reduces electricity usage and provides superior cooling,
is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the
refrigerator near a heat source, such as an oven or radiator.
Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm).
However, if the product is placed against an extended wall and the ability to remove the crisper
pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet
opening width of 54" (137.16 cm) is recommended.
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
Side by Side Refrigerator
KRSC500E KRSC503E
KRSF505E
Electrical: A 115 volt, 60 Hz, AC only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be pro-
vided. Use an outlet that cannot be turned off
by a switch. Do not use an extension cord.
Water: A cold water supply with water
pressure of between 30 and 120 psi (207
and 827 kPa) is required to operate the
water dispenser and ice maker. If you have
questions about your water pressure, call a
licensed, qualified plumber.
Reverse Osmosis Water Supply:
IMPORTANT: The pressure of the water
supply coming out of a reverse osmosis
system going to the water inlet valve of the
refrigerator needs to be between 30 and 120
psi (207 and 827 kPa).
If a reverse osmosis water filtration system is
connected to your cold water supply, the
water pressure to the reverse osmosis
system needs to be a minimum
of 40 to 60 psi (276 to 414 kPa).
To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.27 cm) of space on each side
and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has
an ice maker, allow extra space at the back for the water line connections. When installing your
refrigerator next to a fixed wall, leave a 2" (5.08 cm) minimum space on each side (depending on
your model) to allow the doors to swing open.
NOTES:
This refrigerator is intended for use in a location where the temperature ranges from a
minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature
r
ange for optimum performance, which reduces electricity usage and provides superior
cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the
refrigerator near a heat source, such as an oven or radiator.
Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm).
However, if the product is placed against an e
xtended wall and the ability to remove the crisper
pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet
opening width of 54" (137.16 cm) is recommended.
LOCATION REQUIREMENTS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10768783B
5/15
Model Model Size
Depth
without
Handle
“A”
Depth with
Handle
“B”
Cabinet
Height
“C”
Overall
Height
“D”
Cabinet
Width
“E”
Depth “F”
with Doors
Open 90°
KRSC500E 22.5
27¹⁄₂"
(69.9 cm)
29³⁄₄"
(75.6 cm)
68⁷⁄₈"
(174.9 cm)
69"
(175.3 cm)
35
¹⁄₂"
(90.2 cm)
45⁷⁄₈"
(116.5 cm)
KRSC503E 22.7
27¹⁄₂"
(69.9 cm)
30"
(76.2 cm)
71"
(180.3 cm)
71¹⁄₄"
(181 cm)
35³⁄₄"
(90.8 cm)
45⁷⁄₈"
(116.5 cm)
KRSF505E 25.6
32¹⁄₈"
(81.6 cm)
34"
(86.4 cm)
68³⁄₈"
(173.7 cm)
69"
(175.3 cm)
35³⁄₄"
(90.8 cm)
50¹⁄₂"
(128.3 cm)
D
overall
C
top of
cabinet
incl.
handle
B
not incl.
handle
A
90˚ 90˚
F
E
Handle and door style will vary
with model.
Dimensions “C” and “D” include
rollers extended ³⁄₄" (1.9 cm).
1
/
2" (1.27 cm)
2" (5.08 cm)
Model
Number Model Size
Depth Without
Handles
“A”
Depth -
With Handles
“B”
Cabinet Height
“C”
Overall Height
“D”
Cabinet Width
“E”
Depth “F” with
Doors Open 90°
WRS588FIH 28.5 cu. ft.
32¾"
(83.2 cm) (88.6 cm)
68⁷⁄₈"
(174.9 cm)
69"
(175.3 cm)
51
1
⁄₈"
(129.9 cm)
36"
(91.4 cm)
1
/
2" (1.27 cm)
2" (5.08 cm)
IMPORTANT: This refrigerator is designed for indoor household use only.
34⁷⁄₈"
Page view 0
1

Summary of Contents

Page 1 - Bottom Mount Refrigerator

Bottom Mount RefrigeratorPRODUCT MODEL NUMBERS PRODUCT DIMENSIONSWRS588FIHElectrical: A 115-volt, 60-Hz, AC-only, 15- or 20-amp fused, grounded elec

Comments to this Manuals

No comments