Whirlpool WRS973CIDM Dimensions Guide

Browse online or download Dimensions Guide for Fridges Whirlpool WRS973CIDM. Whirlpool WRS973CIDM Dimensions Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
PRODUCT MODEL NUMBERS
Side by Side Refrigerator
WRS970CID WRS973CID
Electrical: A 115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded electrical supply
is required. It is recommended that a separate circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned off by a switch. Do not use an
extension cord.
Water Supply: A cold water supply with water pressure of between 30 and 120 psi
(207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have
questions about your water pressure, call a licensed, qualified plumber.
Reverse Osmosis Water Supply:
IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system
going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi
(207 and 827 kPa).
If a reverse osmosis water filtration system is connected to your cold water supply, the
water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi
(276 to 414 kPa).
PRODUCT DIMENSIONS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10652927A
4/15
FRONT VIEW
35³⁄₄"
(90.8 cm)
A
3
¹⁄₄"
(8.2 cm)
Model Size Height A
69"
65C\v" (166.9 cm)
72"
68Z\," (172.9 cm )
LOCATION REQUIREMENTS
n The refrigerator can be installed into a recessed opening, at the end of cabinets or
as a freestanding refrigerator.
n If you are installing the refrigerator to fit flush with the front of the base cabinets, all
shoe moulding and baseboards must be removed from the rear of the refrigerator
opening. Allow for 1" (2.54 cm) of space behind the refrigerator.
n This refrigerator is intended for use in a location where the temperature ranges
from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room
temperature range for optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is
recommended that you do not install the refrigerator near a heat source, such as an
oven or radiator.
n Floor must support refrigerator weight (more than 600 lbs [272 kg]) and contents.
TOP VIEW
A
C
35¹⁄₂"
(90.0 cm)
23⁷⁄₈"
(60.4 cm)
15³⁄"
(38.9 cm)
20"
(50.8 cm)
B
⁵⁄₈"
(1.6 cm)
Door Style Depth A Depth B Depth C
Flat
27Z\x"
(69.8 cm)
2B\,"
(6.5 cm) maximum*
30"
(76.3 cm) maximum*
Curved
28B\,"
(72.5 cm)
2B\,"
(6.5 cm)
31Z\,"
(79.1 cm)
*Dimension may vary based on style of door handle.
The width for the largest available handle is listed.
DOOR SWING DIMENSIONS
n Location must permit doors to open to a minimum of 165°.
n In the following graphic, “A” represents the distance needed to fully
open the freezer door and “B” represents the distance needed to fully
open the refrigerator door.
A
41
¹⁄" (104.5 cm)
C
D
B
45⁷⁄₈" (116.4 cm)
90˚
165˚
C
D
Dimension Flat Doors Curved Doors
A
13B\," (34.5 cm) maximum* 13C\v" (34.9 cm)
B
18Z\," (46.0 cm) maximum* 18C\," (46.4 cm)
C
2C\v" (6.7 cm) maximum* 3C\v" (9.4 cm)
D
Z\," (0.2 cm) 1Z\v" (2.9 cm)
*Dimension may vary based on style of door handle.
The width for the largest available handle is listed.
Page view 0
1 2

Summary of Contents

Page 1 - Side by Side Refrigerator

PRODUCT MODEL NUMBERSSide by Side RefrigeratorWRS970CID WRS973CIDElectrical: A 115 volt, 60 Hz, AC only, 15- or 20-amp fused, grounded electrical supp

Page 2 - ¹⁄₄" (8.2 cm)

SIDE VIEWBecause Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and s

Comments to this Manuals

No comments