Whirlpool WRT316SFDW User's Guide download pdf

Steps 3 & 4 apply only

to certain models

While holding the door,

remove 3 hex head screws

and the hinge pin.

DOOR SWING REVERSAL INSTRUCTIONS W10661460B (OPTIONAL)

Remove food and any adjustable bins from the doors.

IMPORTANT: Unplug refrigerator or disconnect power. Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

When removing the door, keep the screws and hinges. You will need them to reinstall the door. For more detailed door reversing instructions, see the User Instructions.

Lift freezer door from

the center hinge pin.

Center Hinge - Loosen the 2

screws (6 turns) on the left-

hand side and remove the

screw from the right-hand side.

3 4

Center Hinge - While holding the

door, loosen the 2 screws on the

right-hand side and remove the

screw from the left-hand side.

Remove Freezer

and Refrigerator

Doors

NOTE: After removing the

doors, place them on a soft

surface to avoid damaging

the finish.

Move the door stop, located on the bottom of the door,

to the opposite side.

A. Door Stop Screw B. Door Stop

Move the door stop, located on the bottom of the door,

to the opposite side.

A. Door Stop Screw B. Door Stop

Move the 3 cabinet hole

plugs to the opposite side.

Reverse Door Stops

Freezer

Door

Refrigerator

Door

Install Doors

Freezer

Door

Refrigerator

Door

Align

Doors

Completely tighten the

3 Top Hinge screws.

Move the base grille cover

to the opposite side.

Reinstall the base grille.

Tighten the two screws (previously

loosened), and reinstall and

tighten the Center Hinge screw.

Tools Required

 " Hex head socket wrench

 " Open-end wrench

 Phillips screwdriver

 ¼" Hex key

 Flat 2" putty knife

Reversibility Kit

(a) Removal tool

(b) Brand badge

(d) Hole plug

(e) Two screws

(a) (b)

(c)

(d)

(e)

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

W10661460B

6/14

Printed in Mexico

Open doors left to right. Open doors right to left.

Insert the 3 Top Hinge screws

so they are halfway into the

Top Hinge and the top of

the cabinet.

Set the freezer door

onto the Center Hinge.

Brand

Badge

Lift refrigerator door from bottom

hinge. NOTE: The hinge style will

vary depending on the model.

For models with base grilles,

firmly pull the grille

toward you to remove.

Move the bottom hinge to the opposite side

of the cabinet. Make sure the washer remains

on the hinge pin. NOTE: The hinge style

will vary depending on the model.

Set the refrigerator door onto

the bottom hinge pin.

2 3

Tighten the screws (previously loosened),

and reinstall and tighten the Center Hinge screw.

NOTE: Make sure washers are on both the top

and bottom pins of the center hinge.

Align the Freezer and Refrigerator

doors. NOTE: Make sure to allow a

¾" (19 mm) gap between the doors.

¾"

(19 mm)

1 2

Summary of Contents

Page 1 - Install Doors

Steps 3 & 4 apply onlyto certain modelsWhile holding the door,remove 3 hex head screwsand the hinge pin.DOOR SWING REVERSAL INSTRUCTIONS W10661460

Page 2 - W10661460B (FACULTATIF)

/HVpWDSHVHWV·DSSOLTXHQWVHXOHPHQWjFHUWDLQVPRGqOHV7RXWHQUHWHQDQWODSRUWH{WHUOHVYLVjWrWHKH[DJRQDOHHWO·D[HGHODFKDUQLqUH6RXOHYHU