Whirlpool WRT541SZDB Instruction Manual

Browse online or download Instruction Manual for Fridges Whirlpool WRT541SZDB. Whirlpool WRT541SZDB Instructions / Assembly User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
While holding the door,
remove 3 hex head
screws and the hinge pin.
DOOR SWING AND HANDLE REVERSAL INSTRUCTIONS W10661205B (OPTIONAL)
Remove food and any adjustable bins from the doors.
IMPORTANT: Unplug refrigerator or disconnect power. Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.
When removing the door, keep the screws and hinges. You will need them to reinstall the door. For more detailed door reversing instructions, see the User Instructions.
1
Lift freezer door from
the center hinge pin.
2
Center Hinge - Loosen the 2
screws (6 turns) on the left-
hand side and remove the
screw from the right-hand side.
3
For models with base grilles,
firmly pull the grille
toward you to remove.
4
Center Hinge - While holding the
door, loosen the 2 screws on the
right-hand side and remove the
screw from the left-hand side.
5
Lift refrigerator door from bottom
hinge. NOTE: The hinge style will
vary depending on the model.
6
Remove Freezer
and Refrigerator
Doors
NOTE: After removing the
doors, place them on a soft
surface to avoid damaging
the finish.
Move the door stop, located on the bottom of the door,
to the opposite side.
A. Door Stop Screw B. Door Stop
Remove the door handle and
the Brand badge from the door.
2
Place the badge (using the template provided
on the last page of the manual), and the
handle on the opposite sides of the door.
3
Tighten the handle
screws.
Move the door stop, located on the bottom of the door,
to the opposite side.
A. Door Stop Screw B. Door Stop
Move the bottom hinge to the opposite side
of the cabinet. Make sure the washer remains
on the hinge pin. NOTE: The hinge style
will vary depending on the model.
1
3
Move the 3 cabinet hole
plugs to the opposite side.
1
Move the plastic spacer from
above the top hinge to below
the hinge, and place the hinge
on opposite side of cabinet.
2
Insert the 3 Top Hinge screws
so they are halfway into the
Top Hinge, plastic spacer and
the top of the cabinet.
3
Remove the screw fastening
the hinge pin to the hinge.
4
Set the freezer door
onto the Center Hinge.
5
Remove the door handle, the screw
and the decal or hole plug from the door.
Move the decal or hole plug and the handle
screw to the opposite sides of the door.
4
Tighten the setscrew
and the handle screws.
4
Set the Refrigerator door onto
the bottom hinge pin.
2
Install the Top Hinge pin, but
do not tighten completely.
Reverse Doors
Freezer
Door
Refrigerator
Door
Install Doors
Freezer
Door
Refrigerator
Door
Align
Doors
1
2
Completely tighten the
4 Top Hinge screws.
3
Move the base grille cover
to the opposite side.
4
Reinstall the base grille.
5
Tighten the two screws (previously
loosened), and reinstall and
tighten the Center Hinge screw.
Tools Required
" Hex head socket wrench
" Open-end wrench
Phillips screwdriver
¼" Hex key
Flat 2" putty knife
Reversibility Kit
(a) Removal tool
(b) Brand badge
(c) Instructions
(d) Hole plug
(e) Two screws
5
16
/
5
16
/
(a) (b)
(c)
(d)
(e)
WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
6
W10661205B
© 2014 Whirlpool Corporation.
All rights reserved.
6/14
Printed in Mexico
Open doors left to right. Open doors right to left.
Brand
Badge
Brand
Badge
3
2
Brand
Badge
Tighten the two screws (previously loosened),
and reinstall and tighten the Center Hinge screw.
NOTE: Make sure washers are on both the top
and bottom pins of the center hinge.
A
B
1
A
B
1
or
or
Steps 4 & 5 apply only
to certain models
1
8
/
Align the Freezer and Refrigerator
doors. NOTE: Make sure to allow a
¾" (19 mm) gap between the doors.
¾"
(19 mm)
Page view 0
1 2

Summary of Contents

Page 1 - Install Doors

While holding the door,remove 3 hex headscrews and the hinge pin.DOOR SWING AND HANDLE REVERSAL INSTRUCTIONS W10661205B (OPTIONAL)Remove food and any

Page 2 - KH[DJRQDOHGH

Tout en retenant la porte, ôterles 3 vis à tête hexagonaleHWO·D[HGHODFKDUQLqUH16RXOHYHUODSRUWHGXFRQJpODWHXUSRXUODGpJDJHUGHO·D[HGHODFKDU

Comments to this Manuals

No comments