Whirlpool ZIS6 1 W User's Guide

Browse online or download User's Guide for Fridges Whirlpool ZIS6 1 W. Whirlpool ZIS6 1 W Setup and user guide [pt] User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
EN
Quick guide
THANK YOU FOR BUYING AN INDESIT PRODUCT
In order to receive a more complete assistance, please
register your product on www . indesit . com/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat
knob to switch on the appliance.
After turning the appliance on, you must wait for 46 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti‑odour lter in the fan as
demonstrated in the lter packaging (if available).
CONTROL PANEL
1. Temperature button
2. Fast Cooling button
3. Indicator LEDs
3.
1.
2.
TEMPERATURE BUTTON
Press the Temperature button on the control panel to adjust the
temperature from the warmest through the lower to the coldest level.
Pressing the Temperature button, the temperature setting will change
cyclically. At rst plug‑in of appliance temperature setpoint is present
at medium position (factory setting).
Following table shows temperature setpoints::
Led ON Led OFFLed ON Led OFF
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Led ON Led OFF
High temp.
Med‑high temp.
Medium temp.
Med‑low temp.
Low temp.
Note: Displayed set points correspond to the average temperature
throughout the whole refrigerator.
FAST COOLING BUTTON
The use of the Fast Cooling function is recommended:
to increase the cooling speed of the refrigerator compartment
when placing a very high quantity of food within it,
To activate the Fast Cooling function, press and hold for 3seconds the
Temperature button on the control panel till all the 3 LEDs will turn on.
Led ON Led OFFLed ON Led OFF
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
The function is automatically deactivated after 6 hours and return to
previous selected set point. The function can be manually deactivated
by pressing and holding for 3 seconds the Temperature button on the
control panel.
INDICATOR LEDS
To display the current temperature setpoint or the Fast Cooling
function.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses LEDs light,
allowing a better lightning as well as a very low energy consumption.
If the LED light system does not work, please contact the Service to
replace it.
Important: The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for more then 8
minutes the light will be automatically switched o.
FAN
The fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food. By default,
the fan is switched on. It is advisable to keep the fan switched on, so
that the “6
th
Sense” function can work properly and also when the
ambient air temperature is above 27 ‑ 28°C or if you notice drops of
water on the glass shelves or in sever humidity
conditions. To turn o the fan press the button of fan.
Please note that when the fan is switched on it will not
continuously work. The fan will start/stop working
depending on the temperature and/or humidity level
inside the fridge. It is therefore absolutely normal if the
fan does not move even if the fan is switched on.
on - o
Page view 0
1 2

Summary of Contents

Page 1 - PRODUCT DESCRIPTION

ENQuick guideTHANK YOU FOR BUYING AN INDESIT PRODUCTIn order to receive a more complete assistance, please register your product on www . indesit . co

Page 2 - TROUBLESHOOTING

19515454600HOW TO STORE FRESH FOOD AND BEVERAGEX XLegendFREEZER ZONETEMPERATE ZONESuggested for the storage of tropical fruit, cans, drinks, eggs, sau

Comments to this Manuals

No comments