Whirlpool 1188826 Use and Care Guide download pdf (Page 5)

Setting the Controls (Control type 3 only)

Starting/Stopping the Dehumidifier

NOTES:

■ Before turning on the dehumidifier, be sure that the bucket is

empty and fits all the way into the dehumidifier.

■ Each time you unplug the dehumidifier or power is

interrupted, the control will return to your previous settings

when power is restored.

Control Type 3

NOTE: Minimum operating temperature is 38ºF (3ºC).

1. Plug into a grounded 3 prong outlet.

2. Press POWER to turn on dehumidifier.

IMPORTANT: If the Empty/Adjust Bucket light comes on, the

dehumidifier will not operate. Empty or adjust bucket.

3. Press POWER to turn off dehumidifier.

NOTE: The dehumidifier will retain your last settings.

Empty/Adjust Bucket Light

If this light is on, the dehumidifier is not running. This light

indicates that you need to check:

■ If the bucket is full, empty and reinstall bucket.

■ If the bucket is not in position, remove the bucket and

reinstall. Make sure the bucket fits all the way into the

dehumidifier and the light is off, or dehumidifier will not run.

Fan Speed (Control Type 3 Models Only)

1. Press FAN to select fan speed.

2. Choose Low, High or Auto.

■ Low—Will reach the desired humidity setting slower with

lower sound level.

■ High—Will reach the desired humidity setting faster.

■ Auto —Will provide the maximum humidity control by

automatically adjusting the fan speed and/or turning the

dehumidifier on and off to maintain humidity setting.

Desired Humidity (Control Type 3 Models Only)

1. Press DESIRED HUMIDITY to select the desired humidity

setting.

2. Choose Normal, Dry, Max Dry or Continuous Run.

■ Normal—Will operate the dehumidifier at the selected fan

speed until the humidity levels are lowered.

■ Dry—Will operate the dehumidifier at the selected fan

speed until the humidity levels are lowered more than the

Normal setting.

■ Max Dry—Will operate the dehumidifier at the selected

fan speed until the humidity levels are lowered to the

maximum level.

■ Continuous Run—Will operate the dehumidifier

continuously at the selected fan speed regardless of

humidity level. The dehumidifier will turn off only if the

bucket is full or removed.

NOTE: The electronic control will cycle the compressor

on and off if a low temperature condition exists.

Pressing the Desired Humidity arrow will not increase

or decrease the amount of moisture removed during a

low temperature condition. Normal compressor operation

will resume when the low temperature condition no

longer exists.

A. Light glows, indicating the bucket is full or is not in correct position.

B. Adjusts amount of moisture removed from room.

C. Selects fan speed.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Whirlpool 1188826 Use and Care Guide Page 5

Comments to this Manuals

Related products and manuals for Dehumidifiers Whirlpool 1188826