Whirlpool ADG 688 WH Instruction for Use

Browse online or download Instruction for Use for Dishwashers Whirlpool ADG 688 WH. Whirlpool ADG 688 IX Instruction for Use [nl] User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
GB
-1-
Chart
START
DELAY
option
ON/OFF
BUTTON
PROGRAMME
SELECTOR
KNOB
(see “Table of
programmes”
below)
START BUTTON
The indicator lights up during operation, flashes when a fault occurs, and goes off at
the end of the programme.
START BUTTON RESET FUNCTION:
Press this button for at least 2 seconds; the selected programme and options will be
cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be
cancelled by RESETTING. Detailed instructions are given in chapter “What to do if...”.
(see at right for options description)
1) Programme data obtained in conformity with European standard EN 50242, obtained under normal conditions
(without additional options) and may vary depending on conditions. Differences of up to 20 minutes are possible
with sensor programmes as a result of the appliance’s automatic calibration system.
2) Reference programme for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: fo
r
detailed information on the EN/Standard loading comparison test and other tests, contact the following address:
Table of programmes
Deter-
gent
Consumption
P
Programmes
Available
options
Loading instructions
Litres Kwh
Minutes
1)
1
Quickwash 45°C
Delay
Lightly soiled crockery, with
no dried-on food. * Use of
tablets not recommended.
X * 11.0 0.80 30
2
Eco
2)
50°C
Delay
Normally soiled crockery.
Energy saving programme.
X 12.0 1.05 165
3
Intensive 70°C
Delay
Recommended programme
for heavily soiled crockery,
especially suitable for pots
and pans.
X 14.0 1.55 155
4
Half Load 50°C
Delay
Ideal for washing a half load of
lightly or normally soiled
crockery.
X 10.0 1.04 145
5
Power Clean 70°C
Delay
Recommended programme
for heavily soiled crockery,
especially suitable for pots
and pans. Intensive wash with
additional water jets.
X 16.0 1.80 220
DELAYED START
BUTTON
Press the button
(repeatedly) to delay the
start of the programme.
Adjustable from 1 to 24
hours. With each press of
the button, the delayed
start indicator increases by
one hour and after 24
restarts from 00. Then
press the START button.
The dishwasher will start
after the set time.
5019 396 01813ADG 688
RINSE AID INDICATOR
When lit, the rinse aid dispenser
needs to be refilled.
SALT INDICATOR
When lit, the salt reservoir
needs to be refilled.
FAULT INDICATION AND WASH TIME DISPLAY
In normal operation it indicates the remaining time
(h:mm), whereas with “Delayed start” selected it
indicates the time remaining until programme start (hh).
If “F..” appears on the display, see chapter “What to do
if...”.
Options and display description
BEFORE USING THE APPLIANCE FOR THE
FIRST TIME CAREFULLY READ THIS QUICK
REFERENCE GUIDE AND THE ASSEMBLY
INSTRUCTIONS! THE GUARANTEE IS NOT
APPLICABLE IF FAULTS ARE CAUSED BY
INCORRECT USE OF THE APPLIANCE.
Quick reference guide
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - 5019 396 01813ADG 688

GB -1-ChartSTARTDELAYoptionON/OFFBUTTONPROGRAMMESELECTORKNOB(see “Table of programmes” below)START BUTTONThe indicator lights up during operation, fla

Page 2 - First time use

GB -2-First time use1- salt reservoir2- rinse aid dispenser3- detergent dispenser4- racks system5,6,7,8- available functions on the panel9- filters10-

Page 3

GB -3-Daily check ELSSELELSELS123Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulatorDaily useThe salt

Page 4 - How to load the racks

GB -4-How to load the racksHow to load LOWER RACK4(In some models only)A - Multipurpose support: Different positions for long utensils, cups and glass

Page 5 - • Press the START button

GB -5-Rectifying minor faults yourself ...Switch off the appliance Everything o.k. ...Wash cycleSelect programmeQuick, permanent or alternating109678O

Page 6 - What to do if

GB -6-What to do if...If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem. Most faul

Page 7

GB -7-What to do if...Crockery and cutlery... Possible causes... Solutions...salt indicator lit- Use tablets for soft water. - Set “Detergent type”

Page 8

GB -8-What to do if...If, after carrying out the above checks, the fault persists, disconnect the mains plug and turn off the water tap.Contact the Af

Comments to this Manuals

No comments