Whirlpool ADP 6829 PC IX Instruction for Use download pdf

-1-

Chart

START

DELAY

option

MULTI

ZONE

option

POWER

CLEAN

option

ON/OFF

BUTTON

PROGRAMME

SELECTOR

KNOB

(See programme

chart below)

START BUTTON

The indicator lights up during operation, flashes when a fault occurs, and goes off

at the end of the programme.

START BUTTON RESET FUNCTION:

Press this button for at least 2 seconds; the selected programme and options will

be cancelled. Main failure displays (repeated flashing of the START indicator lamp)

can be cancelled by RESETTING. Detailed instructions are given in chapter

“What to do if...”.

(see at right for options description)

1) Programme data obtained in conformity with European standard EN 50242, obtained under normal conditions (without additional options) and may vary

depending on conditions. Differences of up to 20 minutes are possible with sensor programmes as a result of the appliance’s automatic calibration system

2) Reference programme for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information on the

EN/Standard loading comparison test and other tests, contact the following address: “nk_customer@whirlpool.com”.

Table of programmes

Detergent

Consumption

Programmes

Available

options

Loading instructions Litres kWh

Minutes

Aqua Steam 60-70°C

Delay

Multizone

Power Clean

Automatic programme

recommended for heavily soiled

crockery with dried-on or burnt

food, for example pans and

saucepans. Thanks to steam action,

soaking or hand pre treatment is

no longer needed. In addition

sanitation is ensured due to the

high temperature steam.

X 13-20 1.10-2.00 100-150

SensorNormal 40-55°C

Delay

Multizone

Power Clean

Automatic programme

recommended for routine washes,

with no dried-on or burnt food

(not for EN 50242).

X 10-13 0.80-1.50 60-120

Pre-Wash cold

Delay

Multizone

Crockery to be washed later. — 4.0 0.03 14

Glasses 40°C

Delay

Multizone

Light soiling, for example glasses

and cups.

X 10.0 0.85 100

Quickwash 40°C

Delay

Multizone

Lightly soiled crockery, with no

dried-on food.

* Use of tablets

not recommended.

10.0 0.65 30

Eco

50°C

Delay

Multizone

Power Clean

Normally soiled crockery. X 12.0 1.05 150

DELAYED START

BUTTON

Press the button

(repeatedly) to delay the

start of the programme.

Adjustable from 1 to 24

hours. With each press of

the button, the delayed

start indicator increases by

one hour and after 24

restarts from 00. Then

press the START button.

The dishwasher will start

after the set time.

5019 396 01675ADP 6829 PC

HALF LOAD/

MULTIZONE

Allows you to choose the

washing zones. Press this

button to select the wash

zones:

both racks

only upper rack

only lower rack

POWER CLEAN

Thanks to the additional

power jets this option

provides a more intensive

and powerful wash in the

lower rack, in the specific

area.This option is

recommended for washing

pots and casseroles

(see

page 4)

. Press this button

to activate Power Clean

(the indicator lights up).

RINSE AID INDICATOR

When lit, the rinse aid dispenser

needs to be refilled.

SALT INDICATOR

When lit, the salt reservoir

needs to be refilled.

FAULT INDICATION AND WASH TIME DISPLAY

In normal operation it indicates the remaining time

(h:mm), whereas with “Delayed start” selected it

indicates the time remaining until programme start (hh).

If “F..” appears on the display, see chapter “What to do

if...”.

Options and display description

BEFORE USING THE APPLIANCE FOR THE

FIRST TIME CAREFULLY READ THIS QUICK

REFERENCE GUIDE AND THE INSTALLATION

INSTRUCTIONS! THE GUARANTEE IS NOT

APPLICABLE IF FAULTS ARE CAUSED BY

INCORRECT USE OF THE APPLIANCE.

Quick reference guide

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - 5019 396 01675ADP 6829 PC

GB -1-ChartSTARTDELAYoptionMULTIZONEoptionPOWERCLEANoptionON/OFFBUTTONPROGRAMMESELECTORKNOB(See programme chart below)START BUTTONThe indicator lights

Page 2 - First time use

GB -2-First time use578623SEL14109In order to always ensure the best cleaning results, you NEED to set: DETERGENT type and WATER HARDNESS.1- salt rese

Page 3 - Daily use

GB -3-Daily check123Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulatorDaily useThe salt level indicat

Page 4 - How to load the racks

GB -4-How to load the racksHow to load LOWER RACK4(In some models only)A - Multipurpose support: Different positions for long utensils, cups and glass

Page 5 - • Press the START button

GB -5-Rectifying minor faults yourself ...Switch off the appliance Everything o.k. ...Wash cycleSelect programmeQuick, permanent or alternating109678O

Page 6 - What to do if

GB -6-What to do if...If a fault occurs, before restoring normal appliance operation.contacting the After-sales Service, make the following checks to

Page 7

GB -7-What to do if...Crockery and cutlery... Possible causes... Solutions...salt indicator lit- Use tablets for soft water. - Set “Detergent type”

Page 8

GB -8-What to do if...Disconnect the mains plugIf, after carrying out the above checks, the fault persists, switch off the appliance, disconnect the m