Whirlpool ADP 720 IX Instruction for Use download pdf

EN -1-

Chart

BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!

5019 300 02394

FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.

PROGRAM

SELECTION

BUTTON

Push “P” button

(repeatedly) until

selected program

number is shown

on the display

(P1...Px) -

see “Table of

programs” -

next page.

After 3 seconds

the cycle

remaining time is

displayed.

START/PAUSE/

RESUME

BUTTON

Push this button to start

the selected program:

the indicator lights up

and goes off at the end

of the program.

Press Start button or

open the door during

washing cycle to pause

the cycle - the Start

Indicator blinks.

To resume the cycle

push Start button and

close the door.

CANCEL/OFF

BUTTON

Push this button to switch

off the control panel.

If pressed for 3 seconds

when a program is running

it cancels this program. If

pressed for 3 seconds

when the dishwasher is

off, it drains the water out.

If pressed during program

and delayed start selection

it cancels the selection and

returns to previous cycle

and option selection.

ECO PROGRAM

INDICATOR

When lit, it indicates that

standard program is active.

MULTIZONE

INDICATOR

When lit, it indicates the

wash in the upper or lower

rack only.

KEYBOARD

LOCK INDICATOR

When lit, it indicates that

keyboard lock is active.

WATER TAP

CLOSED - Alarm

Blinks when there is no inlet

water or water tap is closed.

WASH TIME DISPLAY

Indicates the cycle duration and the remaining time (h:min). With “Delayed start”

selected it indicates the time remaining until program start: “h24” if above

10 hours delay time remain and “h:mm” if below 10 hours delay time remain.

If “Fx Ey” messages appears on the display, see page 9 - chapter “What to do if...”.

DELAY INDICATOR

When lit, it indicates that delay

is active.

SALT INDICATOR

When lit (at the end of the

cycle), the salt reservoir needs

to be refilled.

MULTIZONE

Allows you to choose

the washing zones. The

appliance washes both

racks by default

(indicators are not lit).

To wash only in specific

rack, press this button

repeatedly:

KEYBOARD

LOCK

This option allows you

to lock the buttons on

the control panel.

Children will not be

able to accidentally

start the dishwasher by

pressing the buttons on

the control panel when

this option is selected.

If you want to activate

this option hold down

the button for

3 seconds.

Repeat the same

operation to unlock the

panel.

only upper rack

(including cutlery

rack)

indicator lit

only lower rack

indicator lit

ANTIBACTERIAL RINSE

This function activates an

antibacterial rinse at the end of the

wash cycle, guaranteeing a further

reduction of bacteria.

Press the button to activate or deactivate

the function.

This function can be used with the

programs indicated in the table of

programs.

The dishwasher door must be kept shut

for the entire duration of the program in

order to guarantee reduction of bacteria.

If the door is opened the indicator lamp

starts flashing.

DELAYED START

BUTTON

Push the button (repeatedly)

to delay the start of the

program. Adjustable from

0:30 to 24 hours. With each

press of the button, the delay

start increases by: 0:30 if

selection below 4 hours, 1:00

if selection is below

12 hours, 4 hours if selection

is above 12 hours. If 24 hours

reached, and the button is

pressed, the delayed start is

deactivated - “OFF” message

is shown. Then press the

START button. The delay

time can be adjusted after

Start key press. The

dishwasher will start after the

set time.

POWERCLEAN

Thanks to the additional power jets this

option provides a more intensive and

powerful wash in the lower rack, in the

specific area.

RINSE AID

INDICATOR

When lit (at the end of the

cycle), the rinse aid dispenser

needs to be refilled.

Quick reference guide

Whirlpool is a registered trademark of Whirlpool USA

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - 5019 300 02394

EN -1-ChartBEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!5019 300 02394FOR ENE

Page 2 - Table of programs

EN -10-What to do if...Crockery and cutlery... Possible causes... Solutions...are not perfectly clean/have food residues- Too little space between

Page 3 - Daily check

EN -11-What to do if...Crockery and cutlery... Possible causes... Solutions...have discoloured plastic parts - Tomato/Carrot juice. - Tomato sauce,

Page 4 - Daily use

EN -12-Precautions and general recommendations1. PackingThe packaging materials are 100% recyclable and marked with the recycling symbol .2. Removing

Page 5 - How to load the racks

EN -2-Chart1) Program data obtained under normal conditions and with default options on. Data may vary depending on ambient conditions and used option

Page 6 - D - OPEN

EN -3-First time use1- salt reservoir2- rinse aid dispenser3- detergent dispenser4- racks system5,6,7,8- available functions on the panel9- filters10-

Page 7 - How to use PowerClean

EN -4-Daily check3Daily useAdding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendationsOpen th

Page 8 - Maintenance and care

EN -5-How to load the racks4Long tools can be loaded in the frontal part of the rack (if long tools do not fit in the cutlery rack they can be placed

Page 9

EN -6-How to load the racks4CLICK!Rotate the flapclockwise andhook on rackA - OPEN TO OPEN A:A - CLOSEDAABD - CLOSEDD - OPENIn the upper rack you can

Page 10 - What to do if

EN -7-How to load the racks4Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher

Page 11

EN -8-7Switching off the appliance. Everything OK...Wash cycleSelect program68Maintenance and careMaintenance and careRectifying minor faults yourself

Page 12

EN -9-What to do if...If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem.Most fault