EN -10-
What to do if...
Crockery and cutlery... Possible causes... Solutions...
...are not perfectly clean/have food
residues
- Too little space between dishes (incorrect
arrangement of the concave items in the rack).
- Arrange crockery so that items do not touch each other. Concave items (e.g. bowls, cups)
must be arranged facing downwards in the rack.
- Too little detergent; detergent too old or
incorrectly stored.
- If necessary, use more detergent, observing the manufacturer’s indications as regards dosage.
Always store detergent in a dry place and do not store it for excessively long periods of time.
- Temperature not high enough for heavily soiled
crockery.
- For heavily soiled crockery, select a wash program with a higher temperature (see Table of
programs - chapter “Chart” - page 2).
- Loading of the dishwasher using lower and
upper rack at the same time with “Half load/
Multizone” option.
- If you select the “Half load/Multizone” option (if available), remember to load only the upper
rack or only the lower rack to increase washing power and thus obtain optimum wash
results.
- Clogged spray arms, dirty filters or not fitted
correctly.
- The spray arms must not be clogged, the filters must not be dirty and must be fitted correctly
(see page 8, “Maintenance and care”).
- Spray arms stuck impeded by crockery or
cutlery.
- The spray arms must be able to turn freely and must not be impeded by crockery or cutlery.
...have deposits: regeneration salt residue - Water too hard. - In areas with very hard water, more regeneration salt needs to be added (see page 3, “How to
set water hardness”).
- Salt reservoir cap open. - Close the salt reservoir cap properly.
- Not enough rinse aid. - If you use a combined action detergent, try adding more rinse aid.
...are not dry - Plastic containers dry badly. - Synthetic materials do not dry well; if wet at end of cycle, wipe dry.
- Clean dishes left in dishwasher for a long time
after end of cycle (e.g. when using “Delayed
start” option).
- In this situation, the presence of drops of water on dishes and on the sides of the dishwasher
is normal.
Try releasing the door 5 minutes before removing the dishes.
- Incorrect arrangement of the concave items in
the rack.
- Arrange crockery so that water does not collect in cavities.
- Incorrect dosage the rinse aid. - Increase the dosage of rinse aid (see page 4, “Adding rinse aid”).
- Rapid program selected. - The Rapid program 40°C / 45°C is intended for quickly washing lightly soiled dishes. If used
for a full load of medium/heavy soiled dishes, the dishes may not dry completely. If so, select
a standard-length program. For best results, open the door after the end of the program and
wait 15 minutes before unloading the dishwasher.
(8 pages)
(8 pages)
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals