Whirlpool AGB 379/WP Installation Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
032
-
03 - Gas kettles
13
MAINTENANCE OF THE APPLIANCE
Warning!: All maintenance operations shall only
be performed by a technically qualified service centre!
- To ensure correct and safe operation, the appliance must
be inspected and serviced at least once a year only.
Maintenance includes also to control the components and
tear of pipes, feeding pipes etc..
It is advisable to replace worn components during
maintenance operations to avoid the need for other
maintenance calls and unexpected failures.
- It is also advisable to apply for a maintenance contract
with the customer.
POSSIBLE FAILURES
AND THEIR ELIMINATION
Warning!: Only technically qualified service
centres can perform the operations described below!
Warning!: Before resetting the safety
thermostat, it is always necessary to eliminate the
problem causing its activation (only for models with
indirect heating)!
Problem and possible cause
Access to components and operation
The content of the vat does not heat up:
- the safety thermostat has been activated.
The pilot burner is on but the main burners do not light up:
- loss of pressure in gas supply;
- clogged injectors on main burners.
The pilot burner does not light up:
- clogged injectors on pilot burner;
- faulty ignition plug;
- check the cable of the ignition plug.
The pilot burner does not remain lighted:
- faulty thermocouple;
- partially clogged injector on pilot burner;
faulty cock magnet.
Safety thermostat
The safety thermostat can be reached by removing the
lower front panel once the two side screws have been
unloosed.
Main burners
Remove the lower front panel.
Pilot burner
Remove the lower front panel. The pilot burner is in the
front of the combustion chamber.
Ignition plug and thermocouple
Remove the lower front panel.
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments