Whirlpool Electronic Dryer Service Manual download pdf (Page 13)

2-5

ELECTRICAL CONNECTION

1. Disconnect power.

2. Remove the terminal block cover.

Fire Hazard

Use a new UL listed 30 amp power

supply cord.

Use a UL listed strain relief.

Disconnect power before making

electrical connections.

Connect neutral wire (white or center

wire) to center terminal (silver).

Ground wire (green or bare wire) must

be connected to green ground

connector.

Connect remaining 2 supply wires to

remaining 2 terminals (gold).

Securely tighten all electrical

connections.

Failure to do so can result in death, fire,

or electrical shock.

WARNING

WARNING

Direct Wire

Fire Hazard

Use 10 gauge solid copper wire.

Use a UL listed strain relief.

Disconnect power before making

electrical connections.

Connect neutral wire (white or center

wire) to center terminal (silver).

Ground wire (green or bare wire) must

be connected to green ground

connector.

Connect remaining 2 supply wires to

remaining 2 terminals (gold).

Securely tighten all electrical

connections.

Failure to do so can result in death, fire,

or electrical shock.

3. Unscrew the strain relief from the terminal

block cover.

4. Unscrew the strain relief nut from the

strain relief.

5. Put the power supply cord through the

strain relief nut, then the strain relief.

A. Terminal block cover

B. Strain relief

C. Center, terminal block screw

D. External ground conductor screw

A

D

B

C

A. Power cord

B. Strain relief nut

C. UL listed Strain relief

B

A

C

Power Supply Cord

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Comments to this Manuals

No comments