Whirlpool WGD5000DW Installation Manual download pdf (Page 15)

Remove screws at top, bottom, and side of door (4 screws)

that hold the inner and outer door together. Holding door over

towel on dryer, grasp sides of outer door and lift to separate it

from inner door. Set outer door aside.

NOTE: Do not pry apart with putty knife or screwdriver.

Do not pull on door seal or plastic door catches.

Remove screws from door

Remove the door catch, bezel, and plug from the inside of

the inner door by squeezing and pulling/pushing them. Place

the door catch, bezel, and plug on the sides opposite from

where they were.

Plug

Catch and bezel

Switch door catch, bezel, & plug

Rotate outer door

Rotate outer door 180º and set it back down on inner door.

Reattach outer door panel to inner door panel so handle is

on the side where hinges were just removed. Insert 4 door

screws.

Flip door over

Flip door over so handle side is down.

Attach door hinges

Reattach door hinges to dryer door so that the larger hole is

at the bottom of the hinge.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

No comments

Whirlpool WGD5000DW Installation Manual Page 15