Whirlpool FGS385V Specifications download pdf (Page 14)

Before You Call For Service

If you are having an operating problem,

check the chart to see what the cause

might be before you call for assistance.

OPERATING PROBLEM

Nothing operates.

Oven will not operate.

Burner fails to light.

Burner flames are uneven.

CHECK IF

‘Range is properly connected to gas

and electrical supplies.

. Fuse has blown or circuit breaker has

tripped.

. Control knob is set in the correct

position.

1 The flow of combustion and /or venti-

lation air to the range is blocked.

.The electronic controls are set cor-

rectly. See pages 4-7.

.YOU have programmed a delay start

time.

WHAT TO DO

m Reconnect range to gas and/or electrical

supplies. (See Installation Instructions.)

. Replace fuse or reset circuit breaker. In case

of prolonged power failure, manually light

burners (see page 4).

m Set control knob correctly, if needed.

1 Remove blockage to air flow to and around

range.

. Reset controls, if necessary.

. Range is connected to electrical

power.

n

Fuse has blown or circuit breaker has

tripped.

.Burner ports are clogged.

. Burner ports are clogged.

1 Reconnect range to electrical supply. (See

Installation Instructions.)

. Replace fuse or reset circuit breaker. In case

of prolonged power failure, manually light

burners (see page 4).

1 Clean with a straight pin (see pages 9 and 12)

. Clean with a straight pin (see pages 9 and 12)

If this fails, call an authorized RoperSM service

technician for service.

Burner flames lift off ports,

are yellow, or are noisy

when turned off.

1 Contact an authorized RoperSM service

technician to check air/gas mixture.

Burner makes popping noise

n

Burner is wet from washing. 1 Let dry.

when on.

Continued on next page

Page 14

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments