Whirlpool WBM 650/WH Instruction for Use download pdf

• This appliance is intended to be used in

household and similar applications such as

- staff kitchen areas in shops, offices and other

working environments;

- farm houses and by clients in hotels, motels

and other residential type environments;

- bed and breakfast type environments.

To ensure best use of your appliance, carefully

read the operating instructions which contain

a description of the product and useful advice.

Keep these instructions for future reference.

1. After unpacking the appliance, make sure it is

not damaged and that the door closes properly.

Any damage must be reported to the dealer

within 24 hours of delivery of the appliance.

2. Wait at least two hours before switching the

appliance on, to ensure that the refrigerant

circuit is fully efficient.

3. Installation and the electrical connection must

be carried out by a qualified technician

according to the manufacturer's instructions and

in compliance with the local safety regulations.

4. Clean the inside of the appliance before using it.

BEFORE USING THE APPLIANCE

1. Packing

The packing material is 100% recyclable and bears

the recycling symbol. For disposal, comply with the

local regulations. Keep the packing materials (plastic

bags, polystyrene parts, etc.) out of the reach of

children, as they are a potential source of danger.

2. Scrapping/Disposal

The appliance is manufactured using recyclable

material.

This appliance is marked in compliance with

European Directive 2002/96/EC on Waste Electrical

and Electronic Equipment (WEEE). By ensuring the

correct disposal of this appliance, you can help

prevent potentially negative consequences for the

environment and the health of persons.

The symbol on the appliance, or on the

accompanying documents, indicates that this

appliance should not be treated as domestic waste

but must be taken to a special collection centre for

the recycling of electrical and electronic equipment.

When scrapping the appliance, make it unusable by

cutting off the power cable and removing the doors

and shelves so that children cannot easily climb

inside and become trapped.

Scrap the appliance in compliance with local

regulations on waste disposal, taking it to a special

collection centre; do not leave the appliance

unattended even for a few days, since it is a

potential source of danger for children.

For further information on the treatment, recovery

and recycling of this product, contact your

competent local office, the household waste

collection service or the shop where you purchased

the appliance.

Information:

This appliance does not contain CFCs. The

refrigerant circuit contains R134a (HFC) or R600a

(HC) (see the rating plate inside the appliance).

Appliances with Isobutane (R600a): isobutane is a

natural gas without environmental impact, but is

flammable. Therefore, make sure the refrigerant

circuit pipes are not damaged.

This product may contain Fluorinated Greenhouse

Gases covered by the Kyoto Protocol; the

refrigerant gas is inside a hermetically sealed

system.

Refrigerant gas: R134a has a Global Warming

Potential of (GWP) 1300.

Declaration of conformity

• This appliance has been designed for preserving

food and is manufactured in compliance with

Regulation (CE) No. 1935/2004.

• This appliance has been designed, manufactured

and marketed in compliance with:

- safety objectives of the "Low Voltage"

Directive 2006/95/CE (which replaces

73/23/CEE and subsequent amendments);

- the protection requirements of Directive

"EMC" 2004/108/EC.

Electrical safety of the appliance can only be

guaranteed if it is correctly connected to an

approved earthing system.

SAFEGUARDING THE ENVIRONMENT

1 2 3 4 5 6 ... 16 17

Summary of Contents

Page 1 - SAFEGUARDING THE ENVIRONMENT

4• This appliance is intended to be used inhousehold and similar applications such as- staff kitchen areas in shops, offices and otherworking environm

Page 2 - RECOMMENDATIONS

FOOD STORAGE CHARTStorage time will vary according to the quality of the food, the type of packaging or wrap used (moistureand vapour proof), and the

Page 3 - PRODUCT DESCRIPTION

14Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect theelectrical power supply.Periodically clean the re

Page 4 - REFRIGERATOR COMPARTMENT

DOOR REVERSIBILITY1. Unscrew the two screws which are fixing the middle hinge.Also remove the two big caps on the left. (FIG-1)2. Dismantle the refrig

Page 5

6. Assemble the top hinge and hinge cover on the left side.(FIG-6)7. Replace the top bushing and top bushing cap.(FIG-7) (You can use the bushing cap

Page 6

17Short vacationThere is no need to disconnect the refrigerator from the power supply if you will be away for less thanthree weeks. Use up perishable

Page 7 - FREEZER COMPARTMENT

18Some noises are normal when the appliance is operatingBefore contacting After-sales Service...Performance problems often result from little things

Page 8

19RememberMotor running time depends on different things: number of door openings, amount of food stored,temperature of the room, setting of the tempe

Page 9

20Before contacting After Sales Service:1. See if you can solve the problem yourself (see“TROUBLESHOOTING GUIDE / AFTER-SALES SERVICE”).2. Switch the

Page 10

5INSTALLATION• The appliance must be handled and installed bytwo or more persons.• Be careful not to damage the floors (e.g.parquet) when moving the a

Page 11 - INSTALLATION

6PRODUCT DESCRIPTION2348141569101112131571. Fast freezing compartment2. Ice cube tray3. Ice compartment4. Freezer thermostat5. Freezer shelf6. Fresh c

Page 12 - Figure-5

This appliance is equipped with a No Frost system that does not require manual defrosting.The appliance is also provided with a ventilated system, tha

Page 13 - Figure-9

8FRESH CONTROL COMPARTMENTThis sliding compartment stays colder than the rest of the refrigerator compartment to keep daily foodsfresh longer.It is pr

Page 14 - VACATION

9MOISTURE CONTROL (depending on the model)The fruit and vegetables drawer is provided with a moisture control that allows you to control thenecessary

Page 15

10TO REPLACE THE CRISPER DRAWER LIDFirst step: replacing the crisper drawer lid• Insert the back of the lid into the runners.• Push the lid back into

Page 16

11ICE CUBES• Take out the ice cube tray.• Fill it with water to the indicated level.• Replace the ice cube tray in its original position.• When the ic

Page 17 - ELECTRICAL CONNECTION

12PREPARING FRESH FOOD FOR FREEZINGIt is important to wrap food so that no water, moisture, or vapour may penetrate; this avoids the transferof odours