Whirlpool WVA35642 NFW Instruction for Use download pdf (Page 11)

HOW TO MAKE ICE CUBES

You can remove the complete Twist Ice Maker

(press and hold (1) the leveler on the left and push

it (2) towards you) or you can just remove the ice

cube tray by pulling it (3) towards you.

Fill the tray with potable water (maximum level =

2/3 of the overall capacity).

Place again the Twist Ice Maker in its seat, or

reinsert the ice cube tray within the Twist Ice

Maker. Take care not to spill water.

Wait until the ice cubes are formed (it is

recommended to wait for about 4 hours, with the

Fast Freeze option active).

NOTE: Twist Ice Maker is removable. It can be

placed in horizontal position anywhere in the

freezer compartment or taken out of the appliance

when ice-making is not required.

HOW TO TAKE ICE CUBES

1. Make sure that the storage bin is in place under

the ice tray. If not, slide into place.

 Twist one of levers firmly in the clockwise

direction until the tray twists slightly. The ice

cubes fall into the storage bin.

 Repeat Step 2 for the other half of the tray, if

necessary. You can make ice cubes (see the

chapter “HOW TO MAKE ICE CUBES”) and

store them in the storage bin and pull it towards

you.

 To get ice, slightly lift up the storage bin and

pull it towards you.

NOTE: if you prefer, you can remove the entire

Twist Ice Maker from the appliance, to take the

ice cubes wherever is convenient for you (for

example: directly on the table).

TWIST ICE MAKER

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Whirlpool WVA35642 NFW Instruction for Use Page 11