Whirlpool Chillerator GARAGE REFRIGERATOR User Manual download pdf (Page 15)

The door is difficult to open

■ Gaskets dirty or sticky? Clean gaskets and contact surfaces

with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■ New installation? Allow 24 hours following installation for the

refrigerator to cool completely.

■ Door opened often or left open? Allows warm air to enter

refrigerator. Minimize door openings and keep door fully closed.

■ Large load of food added? Allow several hours for refrigerator

to return to normal temperature.

■ Control(s) set correctly for the surrounding conditions?

Adjust the control(s) a setting colder. Check temperature in

24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■ Humid room? Contributes to moisture buildup.

■ Door opened often or left open? Allows humid air to enter

refrigerator. Minimize door openings and keep door fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■ Refrigerator connected to a water supply and the supply

shutoff valve turned on? Connect refrigerator to water supply

and turn water shutoff valve fully open.

■ Kink in the water source line? A kink in the line can reduce

water flow. Straighten the water source line.

■ Ice maker turned on? Make sure wire shutoff arm or switch

(depending on model) is in the ON position.

■ New installation? Wait 24 hours after ice maker installation for

ice production to begin. Allow 3 days to completely fill the ice

container.

■ Large amount of ice recently removed? Allow 24 hours for ice

maker to produce more ice.

■ Ice cube jammed in the ice maker ejector arm?

Remove ice from the ejector arm with a plastic utensil.

■ Reverse osmosis water filtration system connected to your

cold water supply? This can decrease water pressure. See

“Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■ Water shutoff valve not fully open? Turn the water shutoff valve

fully open.

■ Kink in the water source line? A kink in the line can reduce

water flow. Straighten the water source line.

■ Reverse osmosis water filtration system connected to your

cold water supply? This can decrease water pressure. See

“Water Supply Requirements.”

■ Questions remain regarding water pressure? Call a licensed,

qualified plumber.

Off-taste, odor or gray color in the ice

■ New plumbing connections? New plumbing connections can

cause discolored or off-flavored ice.

■ Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours

for ice maker to make new ice.

■ Odor transfer from food? Use airtight, moisture proof

packaging to store food.

■ Are there minerals (such as sulfur) in the water? A water filter

may need to be installed to remove the minerals.

ACCESSORIES

To order replacement filters, call 1-800-901-2042 and ask for the part

number listed below or contact your authorized Whirlpool dealer. In

Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 49 50

Comments to this Manuals

No comments

Whirlpool Chillerator GARAGE REFRIGERATOR User Manual Page 15

Comments to this Manuals

Related products and manuals for Fridges Whirlpool Chillerator GARAGE REFRIGERATOR