Whirlpool IB 7030 F TW Instruction for Use download pdf (Page 6)

Temperature Controls

For your convenience, your refrigerator and freezer controls are preset

at the factory. When you rst install your refrigerator, make sure that

the controls are still set to the “mid-settings.”

IMPORTANT:

■ Wait 24 hours before you put food into the refrigerator. If you add

food before the refrigerator has cooled completely, your food may

spoil.

NOTE: Adjusting the set points to a colder than recommended

setting will not cool the compartments any faster.

■ If the temperature is too warm or too cold in the refrigerator or

freezer, rst check the air vents to be sure they are not blocked

before adjusting the controls.

■ The preset settings should be correct for normal household usage.

The controls are set correctly when milk or juice is as cold as you

like and when ice cream is rm.

■ Wait at least 24 hours between adjustments. Recheck the

temperatures before other adjustments are made.

Adjusting the Controls:

The FRIDGE button adjusts the refrigerator compartment temperature.

There are ve settings, from left (less cold) to right (coldest). The

recommended “mid-setting” is the third (middle) setting.

■ Each press of the FRIDGE button changes the control by one

setting from left to right. (After reaching the fth setting, the

sequence reverts back to the rst setting.)

Fast Cool

The Fast Cool feature assists with full grocery loads in the refrigerator

or temporarily warm room temperatures.

■ To turn on the Fast Cool feature, press and hold the FRIDGE

button for 3 seconds. When the feature is activated, the Fridge

temperature setting indicators will light up from left to right.

■ The Fast Cool feature will remain on for 12 hours unless manually

turned o. To manually turn it o, press and hold the FRIDGE

button for 3 seconds again. When the feature has been turned o,

the Fridge temperature setting display will return to the previous

setting.

The FREEZER button adjusts the freezer compartment temperature.

There are ve settings, from left (less cold) to right (coldest). The

recommended “mid-setting” is the third (middle) setting.

■ Each press of the FREEZER button changes the control by one

setting, from left to right. (After reaching the fth setting, the

sequence reverts back to the rst setting.)

Fast Cool

The Fast Freeze feature assists with full grocery loads in the freezer, or

temporarily warm room temperatures.

■ To turn on the Fast Freeze feature, press and hold the FREEZER

button for 3 seconds. When the feature is activated, the Freezer

temperature setting indicators will light up from left to right.

■ The Fast Freeze feature will remain on for 48 hours unless manually

turned o. To manually turn it o, press and hold the FREEZER

button for 3 seconds again. When the feature has been turned o,

the Freezer temperature setting display will return to the previous

setting.

If you need to adjust temperatures in the refrigerator or freezer, use

the settings listed in the chart below as a guide.

CONDITION: TEMPERATURE ADJUSTMENT:

REFRIGERATOR

too cold

FRIDGE 1 setting warmer (left)

[Press FRIDGE 4 times]

REFRIGERATOR

too warm

FRIDGE 1 setting colder (right)

[Press FRIDGE 1 time]

FREEZER

too cold

FREEZER 1 setting warmer (left)

[Press FREEZER 4 times]

FREEZER

too warm

FREEZER 1 setting colder (right)

[Press FREEZER 1 time]

Control Lock

The controls can be locked to avoid unintentional setting changes.

■ To lock the controls, press and hold the LOCK button for 3 seconds.

The lock icon on the control panel indicates that the controls are

locked.

If you press any button on the control panel when the controls are

locked, the control panel will beep and the lock icon will ash. You

must rst unlock the controls in order to change any settings.

■ To unlock the controls, press and hold the LOCK button for 3

seconds again. The lock icon will turn o.

Alarm Functions

The red alarm icon on the control panel can indicate a variety of

problems with the product.

Door Open Alarm

Alarm Behaviour: The alarm icon ashes and an audible alarm sounds.

This indicates that one of the doors has been left open for an

extended period of time.

■ Close the door to reset the alarm.

Power Outage Alarm

Alarm Behaviour: The alarm icon ashes and an audible alarm sounds

with the doors closed.

This indicates that a power outage has occurred.

■ Press the ALARM button on the control panel to reset the alarm.

If the audible alarm stops but the alarm icon stays on (constant

instead of ashing), see “Freezer Temperature Alarm” in this

section.

Freezer Temperature Alarm

Alarm Behaviour: The alarm icon turns on constantly (not ashing), an

audible alarm sounds, and the Freezer temperature setting display ashes

(5 leds).

This indicates that the temperature inside the freezer compartment is

unusually warm. This can occur when the product is used for the rst

time, when large amounts of warm food are placed inside the freezer,

after cleaning the interior of the product, if the freezer door has been

left open, or when there has been a power outage.

■ Press the ALARM button on the control panel to reset the alarm.

The audible alarm will stop, but the alarm icon will remain on and

the Freezer temperature setting display will stay on (constant

instead of ashing) until the freezer compartment has cooled to

an acceptable temperature.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Whirlpool IB 7030 F TW Instruction for Use Page 6

Comments to this Manuals

Related products and manuals for Fridges Whirlpool IB 7030 F TW