Whirlpool 3149595 User Manual download pdf (Page 4)

ACAUnON

Floor Damage

Keep shipping base under oven

when moving across floor.

Failure to do so may cause

damage to floor covering,

4

Move over^ close to cabinet

■ opening. Make the

electrical connection. See

"Electrical requirements' and

"Electrical connection' sections.

Panels A and B, for details.

5

Re move and discard the

■ shipping base. Lift oven up

into cabinet opening using the oven

opening as an area to grip. Thread

coble through opening in cabinet.

ACAUTION

Personal Injury/Producl

Damage Hazard

Securely fasten oven lo cabinets

using the eight screws provided.

Failure to do so could cause the

oven to move or tip during use

and result in personal injury or

product damage.

6

Center oven in cabinet

■ cutout. Secure oven to

cabinet using eight screws through

the mounting holes in the front frame

of the oven.

7

Put the air griile in place

■ beiow the iower oven

opening, making sure that the

louvers in the air grille point down,

the flange is at the bottom, and the

mounting holes are at the top, Slide

the air grille into position and attach

it to the oven cabinet with the three,

black or chrome, metal screws

provided.

8.

Repidce the upper oven

door by fitting both corners

of the door over the ends of the

hinges. Push the door evenly and

completely onto the hinges.

Remove the nails from the hinges.

Reinstall two screws in the Inner door

panel. Close the oven door. If the

door does not close, you have not

pushed the door completely onto

the hinges. Repeat for the lower

oven door.

Turn on

power

supply.

Check the

operation of

the oven

elements. Set

the oven selector

control knob to "BAKE", O’heoven

selector control knob is not available

on all models.) Set the oven

temperature control knob to 350°F.

The bottom element should glow red

and the indicator light should be on.

The upper element should become

hot, but not glow red. The oven ’

indicator light goes off when the

oven Is preheated. Repeat for the

lower oven.

the oven selector

and oven temperoture control knobs

to "BROIL", (The oven selector

control knob is not available on all

models.) The top element should

glow red and the indicator light

should be on. Repeat for the lower

oven broil element.

You have just finished

Installing your new

Whirlpool oven. To get the

most efficient use from your new

oven, read your Whirlpool Use

and Care Guide. Keep Installation

Congratulations!

Instructions and Guide close to oven j

, lor easy reference. The Insfruclions /

will make reinstalling your

Whirlpool oven in another

home os easy os the

first installalion.

Panel C

1 2 3 4 5

Comments to this Manuals

No comments