Whirlpool AMD 081 Instruction for Use download pdf (Page 5)

STARTING YOUR PORTABLE

AIR CONDITIONER

This section explains proper portable air

conditioner operation.

IMPORTANT:

• The air conditioner display shows the current

room temperature and 24-hour clock.

• When changing modes while the air conditioner

is operating, the compressor will stop for 3 to 5

minutes before restarting.

If a button is pressed during this time, the

compressor will not restart for another 3 to 5

minutes.

• In Cooling or Dry mode, the compressor and

condenser fan will stop when the room

temperature reaches the set temperature.

NOTE: In the event of a power failure, your air

conditioner will operate at the previous settings

when the power is restored.

1. Select the mode. See "Mode."

2. Select the fan speed. See "Fan Speed."

3. Set the temperature. See "Temperature."

4. Press ON/OFF button to start the air

conditioner.

NOTE: When the air conditioner is turned on for

the first time after it is plugged in, it will run in the

6th Sense Mode control.

When the air conditioner is turned on at all other

times, it will run according to the previous settings.

6th Sense Mode can be selected with the remote

control only.

5. When WATER FULL indicator light glows red,

air conditioner will turn off automatically. See

"Portable Air Conditioner Care" for directions

on draining the air conditioner.

Timer

Swing

RapidCool

Adjust

Fan

Speed

Mode

On/Off

Filter

Reset

Wat e r

Full

Off

1 2 3 4 5 6 7 8 9 10 ... 31 32

Comments to this Manuals

No comments

Whirlpool AMD 081 Instruction for Use Page 5

Comments to this Manuals