Whirlpool AMD 091/1 Instruction for Use download pdf (Page 7)

FUNCTION DESCRIPTIONS

6th Sense mode

The air conditioner automatically selects Cooling,

Dry or Heating mode,depending on room

temperature and sets the target temperature.

Operation mode and temperature are determined

by indoor temperature.

Electric heating models

NOTE: Temperature, airflow and direction are

controlled automatically in 6th Sense mode.

However, a decrease or rise of up to 2 ? can be

set with the remote control if you still feel

uncomfortable.

1. Pre0ss 6th Sense button.

2. In Fan Only mode, press Fan to select High, Mid

or Low.

Jet mode

Used for fast cooling. The air conditioner

automatically sets the fan speed to High and the

temperature to 18ºC.

NOTE: 6th Sense mode button does not operate

when Jet function is selected.

1. Press Jet. The air conditioner automatically sets

the fan speed to High and the temperature to

18ºC.

2. To exit Jet mode press any button except Timer

On/Off and Swing button.

Fan Speed

1. Choose desired fan speed.

2. Each time the "FAN" button is pressed, the fan

speed is changed in sequence:

↱

Auto

→

High

Low

←

Mid

↲

• Auto-automatically controls fan speed

depending on current room temperature and

temperature control setting.

NOTE: Auto fan speed cannot be selected in Fan

Only mode.

• High - for maximum cooling

• Mid - for normal cooling

• Low - for minimum cooling

Temperature

• Press the up Adjust button to raise the

temperature. Press the up Adjust button once to

increase the set temperature by 1ºC, or press

twice to increase the set temperature by 2ºC.

• Press the down Adjust button to lower the

temperature. Press the down Adjust button to

decrease the set temperature by 1ºC, or press

twice to decrease the set temperature by 2ºC.

NOTES:

• In the Cooling or Heating mode, the

temperature can be set between 18ºC and

32ºC.

• In Fan Only mode, the temperature cannot be

set.

U Button

When you press this button,the remote control

transmits signal of the actual room temperature

around it to the unit every 10 minutes. Therefore

please keep the remote control in a location

Indoor

temperature

Operation

mode

Target

temperature

21°C or below HEATING 22°C

21°C-23°C FAN ONLY

23°C-26°C DRY

Over 26°C COOLING 26°C

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Whirlpool AMD 091/1 Instruction for Use Page 7

Comments to this Manuals

Related products and manuals for Mobile air conditioners Whirlpool AMD 091/1