16INSTRUCTIONS FOR USEINSTALLATION ...17SAFEGUARDING THE ENVIRONMENT...20IMPORTA
253. Lift the bottom of the first sheet of glass and remove it (fig. 3).4. Then remove the 2 remaining sheets of glass (fig. 4, fig. 5).5. Refit the s
26Pay attention to the hinges when cleaning and/or removing the door (fig. 8).To remount the door:1. Insert the hinges into their grooves and lower th
27TROUBLESHOOTING GUIDEOven not working:Check for the presence of mains electrical power and if the oven is connected to the electrical supply.Turn
17INSTALLATIONRecommendationsIMPORTANT: Disconnect the oven from the mains before carrying out any installation work or servicing.Installation must b
18For ovens installed under the worktop, leave a minimum clearance of 5 mm between the upper edge of the oven and the lower edge of the worktop (fig.
19Connecting the oven to the power supplyMake sure that the voltage indicated on the rating plate is the same as the mains voltage. The rating plate
20SAFEGUARDING THE ENVIRONMENTDisposal of packaging materialsThe packaging material is 100% recyclable and is marked with the recycle symbol .The va
21Make sure that the electrical cables of other appliances used near the oven do not touch hot parts and are not trapped in the oven door.Some oven
22OVEN ACCESSORIES Accessories supplied depend on the model. The accessories provided with the oven are listed in the Product Description Sheet provid
23CARE AND MAINTENANCEImportant: never clean the appliance with high pressure water or steam cleaning equipment.Exterior of the ovenClean with a damp
24Attention: When carrying out the following operations it is advisable to wear protective gloves. These instructions should be carefully followed bot
Comments to this Manuals