Whirlpool 5KPEXTA Instruction for Use download pdf (Page 7)

7

English

Before Attaching Pasta Shape Press

Accessory

Remove “Do not immerse in water” label,

and detach the storage case from the

accessory housing top.

To Attach:

1. Turn Stand Mixer speed control to "0"

(OFF).

2. Unplug Stand Mixer or disconnect

power.

3. Loosen the accessory knob (P) by

turning it counterclockwise.

4. Remove the accessory hub cover.

5. Insert the accessory shaft housing (N)

into the accessory hub (O) making

certain that accessory power shaft fits

into square hub socket.

6. It may be necessary to rotate the

accessory back and forth. When the

accessory is in proper position, the pin

on the accessory housing will fit into

the notch on the hub rim.

7. Tighten the accessory knob by turning

it clockwise until the accessory is

completely secured to Stand Mixer.

P

O

N

To Attach Pasta Shape Press Accessory

To Use Pasta Shape Press Accessory

2. Slowly feed walnut-size pieces of

dough into the hopper; dough should

self-feed. The auger should be visible

before adding the next piece of dough.

3. Use combo tool to push dough only if

dough becomes caught in hopper and

no longer self feeds.

1. Set the Stand Mixer speed between

6 and 10, according to pasta type

and personal preference. For best

results, Fusilli should be extruded at a

maximum speed of 6. Slower speeds

are also recommended for very short

pasta. Longer pasta, such as Spaghetti

may be extruded at higher speeds.

Rotating Blade Hazard

Always use combo tool.

Keep fingers out of openings.

Keep away from children.

Failure to do so can result in

amputations or cuts

WARNING

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments