Whirlpool ED20PK User Manual download pdf (Page 7)

Removing and adjusting the freezer shelves...

NOTE: The cup shaped supports go in the back

of the freezer.

To remove the shelf:

1. Lift right side of sheif off supports.

2. Siide shelf out of shelf support holes.

3. Replace in reverse order.

To adjust the shelf:

1. Remove shelf.

2. Remove supports by sliding upwards.

3. Replace supports on desired level.

4. Replace shelf.

Changing the light bulbs...

^WARNING

Electrical Shock Hazard

Before removing a light bulb, either unplug the refrigerator or disconnect the electricity

leading to the refrigerator at the main power supply. Shock and injury can occur if electricity

remains connected.

GRASP LIGHT SHIELD

PULL BOnOM FORWARD

To Change refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the control console to find bulb.

3. Remove bulb.

4. Replace wifh a 40-watt appliance bulb.

5. Reconnect power supply.

To change freezer light:

1. Disconnect refrigerator from power supply.

2. Grasp fronf of light shield.

3. Pull bottom of shield fonward until it snaps free.

4. Remove bulb.

5. Replace with a 40-watt appliance bulb.

6. Press light shield straight on until it snaps into

place.

7. Reconnect power supply.

Optional automatic ice maker...

If you have the automatic ice maker accessory,

or if you plan to add one later (Part No. ECKMF-90),

there are a few fhings you will want to know;

• The ON/OFF lever Is a wire signal arm.

Down...for making ice aufomafically.

Up...to shut off the ice maker.

DO NOT TURN ICE MAKER ON UNTIL IT IS CON

NECTED TO THE WATER SUPPLY.

LOWER

SIGNAL

ARM TO

START IT

RAISE

SIGNAL

ARM TO

STOP ICE

• The dial or lever on the side of the ice maker

changes the size of the cubes.

• Shake the bin occasionally to keep cubes sepa

rated, and to obtain increased storage capacity.

• It Is normal for ice crescents to be attached by a

corner. They will break apart easily.

• You will hear water running when ice maker is

working. You’ll hear ice fall into the bin. Don’t let

these sounds bother you.

• The ice maker will not operate until the freezer

is cold enough to make ice. This can take

overnight.

• Because of new plumbing connections, the first

ice may be discolored or off-flavored. Discard

the first few batches of ice.

continued on next page

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Whirlpool ED20PK User Manual Page 7

Comments to this Manuals

Related products and manuals for Refrigerators Whirlpool ED20PK