4
ADJUSTMENT OF THE FEET
- The appliance must be installed on a solid and level floor surface (if necessary use a spirit
level). If the floor is wooden or floating, distribute the weight by placing it on a sheet of
plywood measuring at least 60 x 60 cm and thickness of at least 3 cm which is screwed
to the floor. If the floor is uneven, adjust the 4 levelling feet as required; do not insert
pieces of wood etc. under the feet.
4.
- Slacken the locknut clockwise (see arrow)
using the wrench supplied.
5.
- Lift slightly the machine and adjust the height
of the foot revolving it.
6.
- Important: tighten the locknut by turning it
anti-clockwise towards the appliance casing.
Comments to this Manuals