Whirlpool KVE 10S7000L A++WS Instruction for Use download pdf (Page 11)

1.The appliance is not working.

• Isthereapowerfailure?

• Istheplugproperlyinsertedinthesocket?

• Isthemainpowerswitchon?

• Hasthefuseblown?

• Isthepowersupplycabledamaged?

• Isbutton(B)settoStand-by?

2. Temperature inside the compartments is not low enough.

• Arethedoorsclosedproperly?

• Istheapplianceinstallednearaheatsource?

• Aretheaircirculationgrillesblocked?

3. Water collects at the bottom of the refrigerator compartment.

• Isthedefrostwaterdrainblocked?

4. The inside light is not working.

Perform the checks for problem 1andthen:

• Disconnecttheappliancefromthemainspowersupply.

• Ifyourappliancehasabulb,refertotheinstructionsandillustrationontheattachedproduct

description sheet for inspection and replacement

• Ifyourappliancehasledlights,contacttheafter-salesservice.

5. Excessive frost build-up in the low temperature compartment.

• Isthelowtemperaturecompartmentdoorclosedproperly?

6. The acoustic alarm sounds, the inside light is intermittent and the red led (G) flashes

• Thedoorhasbeenopenformorethan2minutes.Pressbutton(F) to mute the alarm or close

the door.

7. The acoustic alarm sounds, the red led (G) and the letter “F” flash on the display

• Temperaturesensorfault.Pressbutton(F) to deactivate the alarm and contact the after-sales

service

Note:

• Ifthealarmconditiondescribedatpoint 7 arises, the temperature setting button (C) and button

(D) cannot be used, but the appliance still maintains compartment temperatures that guarantee

safe storage conditions for food

• Itisnormalfortheappliancetomakearangeofnoises(gurglingandhissingduetoexpansion

in the refrigerant circuit ...) during the normal operating cycle.

TROUBLESHOOTING GUIDE

1 2 ... 6 7 8 9 10 11 12 13 14 15

No comments

Whirlpool KVE 10S7000L A++WS Instruction for Use Page 11