Whirlpool AMD 084 User Manual download pdf (Page 6)

6

OPERATING MODE DESCRIPTION

Operating modes:

1. Press and release MODE until you see the

symbol glow for the desired setting

2. Choose Cooling, Dry or Fan Only.

• Cooling-Cools the room. Press FAN SPEED to

select Auto, High, Mid or Low. Press the up or

down Adjust button to adjust the temperature.

• Dry-Dries the room. The air conditioner

automatically selects the temperature. The fan

runs on Low speed only.

NOTE: Dry mode should not be used to cool the

room.

• Fan Only-Only the fan runs. Press FAN SPEED

to select High, Mid or Low.

NOTE: Auto fan speed cannot be selected in Fan

Only mode.

Fan Speed

1. Press and release FAN SPEED to choose the

desired fan speed.

2. Choose Auto, High, Mid or Low.

• Auto-automatically controls the fan speed

depending on the current room temperature

and temperature control setting.

NOTE: Auto fan speed cannot be selected in Fan

Only mode.

• High-for maximum cooling

• Mid-for normal cooling

• Low-for minimum cooling

Filter Reset

1. When the Filter Reset indicator light is lit,

remove, clean and replace the air filter. See

"Cleaning the Air Filter."

2. Press and release FILTER RESET after replacing

the air filter.

NOTE: After 360 hours of fan operating time, the

Filter indicator light will turn on. It will remain on

for 180 hours or until you press FILTER RESET.

After 180 hours, it will turn off automatically.

Temperature

• Press the up Adjust button to raise the

temperature. Press the up Adjust button once to

increase the set temperature by 1°C or press

twice to increase the set temperature by 2ºC.

• Press the down Adjust button to lower the

temperature. Press the down Adjust button

once to decrease the set temperature by 1ºC,

or press twice to decrease the set temperature

by 2ºC.

NOTES:

• In the Cooling mode, the temperature can be

set between 18ºC and 32ºC.

• In Fan Only mode, the temperature cannot be

set.

• To change the temperature display between ºC

and ºF, press both the up and down Adjust

buttons at the same time.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments