Whirlpool AWZ 3413 Instruction for Use download pdf (Page 6)

VENT CONNECTION

Normally the hose and adaptor are not supplied; the accessory AMH

577 kit, available at your dealer or our After Sales Service, should be

used.

Installing the vent hose

Place a towel or the packing material on the right-hand side next

to the dryer.

Place the dryer on its right-hand side (seen from the front) on the

towel or the packing material.

Push the adapter into the hose (see illustration). Attach the air vent

hose adapter to the connection located under the dryer and lock

it by means of the foreseen lugs.

Venting outside

•

Without kinking it, lead the vent hose outside (inside diameter 10

cm, maximum length with two bends 3 m).

•

Ensure that the vent hose does not sag when stacking the dryer on

a washing machine. It should only be placed horizontally or

upwards.

•

Do not connect to ventilation systems protected by fly nets. These

can become clogged and cause malfunctioning of the dryer.

•

Do not connect the air vent hose to a chimney or to a mechanical

ventilation extractor duct.

•

Do not connect the vent hose to the heating system. Only connect

the hose to ventilation systems insulated against humidity.

•

Please provide adequate ventilation to avoid the back flow of gases

into the room from appliances burning other fuels, including open

fires.

Dryer operation without vent hose

•

Only use the dryer in a large, well-ventilated room.

•

Keep the room free of dust and lint.

A minimum distance of 10 cm between rear of appliance and the wall

must be observed.

Dryer placed close to the wall; venting to the left or right

Install the dryer by using the bi-directional kit AMH 869, available at

your dealer, should be used.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Whirlpool AWZ 3413 Instruction for Use Page 6

Comments to this Manuals

Related products and manuals for Tumble dryers Whirlpool AWZ 3413