Whirlpool HSCX 90440 Use and Care Guide

Health & Safety, Use & Care and Installation guidewww.whirlpool.eu/register

10PRODUCT DESCRIPTIONAPPLIANCECONTROL PANEL1. Worktop2. Control panel3. Water tank4. Door5. Door handle6. Door lter (behind door) 7. Plinth8. Adjus

11ENDOORDRUM LIGHT (if available)AVAILABLE ACCESSORIES To open the door, pull the handle.If you interrupt a running programme by opening the door, th

12FIRST TIME USEHOW TO USE THE APPLIANCE1. WHEN SWITCHING ON THE DRYER FOR THE FIRST TIME, YOU WILL BE ASKED TOSet the desired languagePress the UP o

13ENDAILY USE WARNINGMake sure that no lighters or matches remain in the laundry. Make sure that the laundry is not soaked with ammable liquids.1. L

14selectable for your programme are indicated on the display.Press the UP or DOWN key to navigate through the list of available options. The selected

15ENPROGRAMMESMeaning of the care labels:The dots indicate the temperature degree for drying the laundry.Normal temperatureReduced temperatureDo not t

16PROGRAMME Type of Wash and RecommendationsCare LabelsRegulationsDELICATES For drying delicate laundry which needs gentle treatment.max. load (kg):

17ENPROGRAMME Type of Wash and RecommendationsCare LabelsRegulationsDRYING TIME Time-restricted drying programme. Select programme duration by optio

18max = maximum capacity of the dryer Programme durations indicated in the table are default values. The programme duration mainly depends on the hum

19ENSTEAM OPTIONFRESH CAREGENTLEDRYING TIME OPTIONDRYNESS LEVELMinimizes creasing of garments made of cotton, synthetics and their blends by adding a

2ENGLISH ...3

20FUNCTIONSON/OFFUP AND DOWN KEYSSTART/PAUSEKEY LOCKFINISH INTo switch the dryer on: press the button until the Start/Pause button lights up. To switc

21ENhours and minutes of the Finish in period blinks.The programme starts automatically, in time to be nished at the end of the delay period.The prog

22INDICATORSENERGY MONITORFAILUREThe less levels of the energy monitor are lit, the more economic is your programme setting.For any failure indication

23ENENERGY SAVING TIPS• To reduce the drying time, make sure that the laundry is spun with the maximum possible spin speed of the wash programme. Thi

24CLEANING & MAINTENANCEEMPTYING THE WATER TANKEmpty the water tank after each programme, provided the drain hose is not connected to your sewage

25ENClean the door lter after each programme.Make sure that the laundry is unloaded. Open the door.1. Remove the door lter by pulling it upwards. 2.

264. Clean the lter foam and the lter by hand or under running water. Do not wash the lter foam in the washing machine.5. Carefully wring out the 

27EN8. Insert the bottom lter again. Make sure that it is completely integrated in the lter compartment.9. Clap the lter handle downwards.10. Close

28CLEANING THE OUTSIDE OF THE DRYERUse a soft damp cloth to clean the outer parts of the dryer.Do not use glass or general purpose cleaners, scouring

29ENREVERSING THE DOOR STOPIf needed, the door stop of the dryer door can be reversed. Use pliers and a cross-head screwdriver for the procedure. For

3ENENGLISHHEALTH & SAFETY, USE & CARE and INSTALLATION GUIDESTHANK YOU FOR BUYING A WHIRLPOOL PRODUCT. In order to receive a more complete

305. Unscrew the bottom screw, to release the cover frame on the front of the door.6. Turn the door and lay it down on the door glass. 127. Carefully

31EN9. Remove the two side screws. Do this on both sides of the door.10. Remove the 4 inner screws on each side of the door.11. Remove the side parts

3213. Fix the 2 side screws on both sides of the door again.14. Fix the 4 inner screws on each side again.15. Turn the door and lay it down on the doo

33EN17. Turn the door again and lay it upside down. Fix the bottom screw again.18. Insert the door lock on the right side of the door opening. Press i

34Your dryer is equipped with various automatic safety functions. These enable failures to be detected in good time and the safety system can react ap

35ENProblem Possible Cause SolutionWATER DROPLETS ARE BENEATH THE DRYERBottom lter not inserted correctly• Check position of the bottom lter and ma

36FAILURE INDICATOR AND MESSAGESMake sure to • Empty the water tank after each programme• Clean the door lter after each programme• Clean the bott

37ENBelow is a summary of possible failure causes and solutions. If the problem persists after having followed the instructions as indicated below, pr

38TRANSPORT AND HANDLING1. Unplug the dryer.2. Make sure that door and water tank are properly closed.3. If the drain hose is connected to your sewage

39ENAFTER-SALES SERVICEBEFORE CALLING THE AFTER-SALES SERVICEIF AFTER THE ABOVE CHECKS THE FAILURE STILL OCCURS, GET IN TOUCH WITH THE NEAREST AFTER

4CLEANING & MAINTENANCE ...24EMPTYING THE WATER TANK ...

402a. 2b.1.

41EN3a.3b.max 2 cmmax 0.79 inch

424.max 100 cm39 inch12

43EN5.6b.6a... xxx V ~ xx Hz xx A IPX4 EV Dxxxx xxxx xxxx

44

45EN400011111267

5ENSAFETY INSTRUCTIONSIMPORTANT TO BE READ AND OBSERVEDBefore using the dryer carefully read, Health and Safety and Use and Care guides.Keep these in

6out so that the heat is dissipated.The last phase of the drying cycle is done without heat (cool down phase), to assure that the laundry stays at a t

7ENand fuse(B). 2. Fit replacement 13A fuse into fuse cover. 3. Ret both into plug.Important:The fuse cover must be retted when changing a fuse and

8SCRAPPING OF HOUSEHOLD APPLIANCESWhen scrapping the dryer, make it unusable by cutting o the power cable and removing the doors and shelves (if pres

9ENDECLARATION OF CONFORMITYThis appliance has been designed, constructed and distributed in compliance with the requirements of European Directives: