Whirlpool ETl8TK User Manual download pdf (Page 4)

Install properly.. .

Remove sales labels.. .

1. Allow 3 inches (7.5 cm] between overhead cab-

inets and the refrrgerator top.

Allow at least an inch (2.5 cm] between the refrig-

erator condenser and the wall.

3. Allow % inch (1.25 cm) on each side of the re-

frigerator for ease of installation.

4. If the refrigerator is to be against a wall, you might

wont to leave enough space so the door can be

opened wider.

Level refrigerator-freezer...

Leveling screw

Use Screwdriver

to Adjust

1. To raise front, turn each screw to the right

2. To lower front, turn each screw to the left.

3. Check with level.

Remove the Consumer Buy Guide label and other

inside labels before using the refrigerator. Any glue

left can be taken off with rubbing alcohol.

NOTE: DO NOT REMOVE ANY PERMANENT IN-

STRUCTION LABELS INSIDE YOUR REFRIGERATOR.

Do not remove the Tech Sheet fastened under

the refrigerator at the front.

Clean it.. .

Clean your refrigerator before using it. See clean-

ing instructions on page 8.

Plug it in...

grounding type

Refrigerator

Power Cord

RECOMMENDED GROUNDING METHOD

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused

and properly grounded electrical supply is re-

quired. It is recommended that a separate circuit

serving only this appliance be provided.

Do not use an extension cord. Use a recep-

tacle which cannot be turned off with a switch

or pull chain. See

individual electrical require-

ments and grounding instruction sheet in your liter-

ature package.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Whirlpool ETl8TK User Manual Page 4

Comments to this Manuals

Related products and manuals for Unknown Whirlpool ETl8TK