Whirlpool WZF56R16DW Use and Care Manual download pdf (Page 6)

Freezer Leveling and Door Closing

Style 1—without Grille

1. Locate the 2 front leveling legs taped among the packing materials.

2. Screw these legs into the front holes on the bottom of the freezer.

The back of the freezer rests on 2 fixed supports.

3. Adjust the front legs enough to lift the cabinet up off the floor.

4. Place a leveling tool on top of the freezer first side to side, then

front to back. Turn leg counterclockwise to raise a corner. Turn leg

clockwise to lower a corner.

5. Repeat Step 4 until freezer is level.

6. After freezer is fully loaded with food, recheck with level as in

Step 4.

Style 2—with Grille

Your freezer has 2 front adjustable legs, one on each side. The back of

the freezer rests on 2 fixed rollers. The base grille covers the adjustable

brake feet and roller assemblies located at the bottom of the freezer

below the freezer door. Before making any adjustments, remove the

base grille and move the freezer to its final location.

Tools Needed: ¹⁄₄" hex driver, Phillips head screwdriver

1. Remove the base grille screws. Grasp the grille firmly and pull it

toward you. Open the freezer door to access the brake feet.

A. Cabinet Hinge Hole Plugs

Door Swing Reversal and Handle Removal (optional)

A. Grommet

B. Handle

C. Setscrews

Door Removal &

Replacement

Top Hinge

A. Top Hinge Cover

Hex-Head Hinge Screws

C. Top Hinge

Bottom Hinge

A. Hinge Pin

Hex-Head Hinge Screws

A. Hinge Pin

Hex-Head Hinge Screws

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Whirlpool WZF56R16DW Use and Care Manual Page 6