Whirlpool AMD 350 Instruction for Use download pdf (Page 9)

AIRFLOW DIRECTION CONTROL

5. Airflow direction control

Vertical airflow is automatically adjusted to a

certain angle in accordance with the operation

mode after turning on the appliance. The direction

of airflow can be also adjusted to your own

requirement by pressing the Swing button of the

remote control.

Vertical airflow control (using the remote

control)

Each time the Swing button is pressed, vertical

airflow is changed in sequence:

When the vertical adjustment louver starts to

swing up and down, if this button is pressed, the

louver will stop at current position. When the

status is switched from off to , if this button is

pressed again 2 seconds later, status will switch to

off status directly; if this button is pressed again

within 2 seconds, the change of swing status will

follow the sequence stated above.

Press SWING button continuously for more than

2s, the main unit will swing back and forth from up

to down, and then loosen the button, the unit will

stop swinging and present position of louver will

be kept immediately.

Horizontal airflow control (with hands)

Turn the control rods of the horizontal adjustment

louvers to change horizontal air flow as shown.

Note: The shape of the appliance may look

different from that of the air conditioner you have

selected.

A - Do not turn the vertical adjustment louvers

manually, otherwise malfunction may occur. If

that happens, turn off the appliance first and

cut off the power supply, then restore power

supply again.

B - It is better not to let the vertical adjustment

louver tilt downward for a long time at

COOLING or DRY mode to prevent

condensed water from dripping.

control rod of horizontal

adjustment louvers

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Whirlpool AMD 350 Instruction for Use Page 9