Whirlpool WFW96HEAC User Manual download pdf (Page 4)

CONTROL PANEL AND FEATURES

Not all features and cycles are available on all models.

POWER

Touch to turn the washer on and off. Touch to stop/cancel a

cycle at any time.

WASH CYCLE KNOB

Use your Wash Cycle knob to select available cycles on your

washer. Turn the knob to select a cycle for your laundry load.

An LED will light up for the cycle selected.

NOTE: The Clean Washer LED will ash when the washer

has run 30 wash cycles as a reminder to run the Clean

Washer cycle.

See “Cycle Guide” for detailed descriptions of cycles.

NOTE: For best results when using the Wash & Dry cycle,

use for loads weighing 2.5 pounds and less, such as a

soccer uniform or a running tank and shorts.

START

Touch and hold until the light above START comes on to

start a cycle, or touch once while a cycle is in process to

pause it. If you want to add a garment, you can touch START

when the “Add Garment” LED is on.

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and

the Estimated Time Remaining will be displayed. Factors

such as load size, wash temperature, and water pressure

may affect the time shown in the display. Tightly packing,

unbalanced loads, or excessive suds may cause the washer

to lengthen the cycle time, as well.

Touch the desired option along the bottom of the display to

adjust settings. See “Cycle Guide” for available settings on

each cycle. Not all settings are available with all cycles.

Precision Dispense

liquid HE detergent cartridge

Powdered HE detergent compartment

Liquid fabric softener

Chlorine bleach

Cycle Status Lights

For details, see “Cycle Status Lights”.

Precision Dispense – Detergent Concentration

and Water Hardness

These options are used to set detergent concentration

(2x–6x) and to set water hardness level (normal, hard,

or soft). (See “About Detergent Concentration” section.)

IMPORTANT: When using the dispenser cartridge with

concentrated liquid detergent, be sure to change the detergent

concentration settings in the control if the detergent used is

different than factory preset of 2x concentration.

Wash Temp

The recommended wash temperature is preset for each

cycle. You may also select a wash temperature based on the

type of fabric and soils being washed. For best results, use

the warmest wash water safe for your fabric, following the

garment label instructions. All wash temperatures feature a

cold rinse.

Spin

This washer automatically selects the spin speed based

on the cycle selected. Some preset speeds can be changed.

• Faster spin speeds mean shorter dry times, but may

increase wrinkling in your load.

• Slower spin speeds reduce wrinkling, but will leave

your load more damp.

NOTE: The control panel features a sensitive surface that responds to a

light touch of your nger. To ensure your selections are registered, touch

the control panel with your nger tip, not your ngernail. When selecting

a setting or option, simply touch its name.

B EA C D

1 2 3 4 5 6 7 8 9 ... 51 52

Comments to this Manuals

No comments

Whirlpool WFW96HEAC User Manual Page 4

Comments to this Manuals

Related products and manuals for Washers Whirlpool WFW96HEAC