Whirlpool AWM 241 Instruction for Use

22 INSTALLATION INSTRUCTIONSMOBILITY WHEELS(for UK only)Depending on model, your washing machine is provided with mobility wheels.You will find these

13WHEN TO REMOVE THE FILTER•Check and clean the filter at least 2 or 3 times a year.•When the appliance does not drain or spin properly.•When the pump

12 Indicates the programme selected and the current step in the sequence.Green zone: Main wash.Black stripes: Rinse.Solid black zone: Final spin.“Stop

11(Depending on model, see also the separate programme chart).Prewash button •Only select for washing heavily soiled laundry (sand and grainy dirt).•T

10 SELECTING THE PROGRAMME(See also the separate programme chart and consumption data)1.Open the tap(s).2.Turn the programme selector knob to the desi

9FILLING THE DETERGENT AND ADDITIVESThe drawer will have three or four chambers depending on the appliance model.1.Pull out the detergent drawer.2.Fil

8 CHOOSING THE RIGHT DETERGENTThe type of detergent depends on:•the type of fabric (cottons, synthetics, delicates, wool, silk);Note: Use only specifi

71. Sort the load according to:• Fabric type / care label symbolCotton, mixed fibres, synthetics, wool, silk, viscose.• Colours Separate coloured and

6 • PackingThe packaging is marked with the recycling symbol , signifying that it can be 100% recycled.• ApplianceThe appliance is made of recyclable

51.Worktop2.Control panel3.Detergent drawer4.After-Sales Service sticker (inside door)5.Door6.Door handle-To open: press the button on the inside of t

4 GB CONTENTSAPPLIANCE AND ACCESSORIESPAGE5PROTECTING THE ENVIRONMENTPAGE6SAFETY INSTRUCTIONSPAGE6MOVING AND TRANSPORTING THE APPLIANCEPAGE6SORTING TH

211) ELECTRICAL CONNECTIONS“Warning - this appliance must be earthed”This appliance is normally supplied with a mains lead having a plug fitted in the

3QUICK REFERENCE GUIDE GBBEFORE USING THE APPLIANCE FOR THE FIRST TIME:• IMPORTANT: MAKE SURE YOU HAVE READ THE “INSTALLATION INSTRUCTIONS”• REMOVE TH

20 DRAIN HOSE•Drain hose connection to water outlet.1.Unhook the drain hose from the left clip, (see arrow A Fig. 1.) Do not loosen the drain hose con

19WATER SUPPLY•Water supply: only cold water.•Tap: 3/4" threaded hose connector.•Water pressure (mains pressure): 10-100 N/cm2 (1-10 bar).INLET H

18 INSTALLATION•Install the appliance on a solid and level floor surface, preferably in a corner of the room.•Make sure that all four feet are resting

17TRANSIT BOLTSThe appliance is fitted with transit bolts to prevent internal damage while it is being moved.Before using the appliance the transit bo

16 Machine vibrates during spin cycle:Check the following:-Is the machine perfectly horizontal with all four feet on ground? (see “Installation Instru

15The appliance is equipped with automatic safety functions able to quickly identify and indicate the presence of faults and react appropriately.Most

14 APPLIANCE EXTERIOR AND CONTROL PANEL•Clean using normal household detergent (do not use abrasive products).•Dry with a soft cloth.DETERGENT DRAWERD