Whirlpool AWM 8000 Instruction for Use download pdf (Page 9)

REMOVING THE FILTER

Removing the filter

The filter must be taken out if:

•

if the washing machine does not drain properly,

•

if small items, e. g. buttons and coins rattle in the pump and

•

2 to 3 times a year for inspection.

You must remove the residual water before taking out the filter.

Carry out the steps in the “Draining Residual Water” section, but

only up to point 4. Then follow the points given below.

Open the filter but do not withdraw it completely. Slowly turn

the handle anticlockwise until the water drains out. Make sure

that the water has cooled before letting it drain.

Wait until all the water has drained out.

Now unscrew the filter completely and extract it.

Clean the filter and the filter chamber.

Check that the pump impeller can still rotate.

Insert the filter with the guide pin upwards and screw it in

clockwise.

Lay the hose in the cover, fold the cover up and close it using

the detergent dispenser insert or a coin. The dot points to the

closed lock.

Pour about 1 l of water into the detergent dispenser to

reactivate the Eco System. You must also put the plug back

into the socket.

You can now load the washing machine and start the desired

programme.

3gb15102.fm Page 12 Friday, August 27, 2004 6:51 PM

Black process 45.0° 150.0 LPI

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Whirlpool AWM 8000 Instruction for Use Page 9