Whirlpool AWZ 410 Instruction for Use download pdf (Page 4)

5019 301 20104

Quick Reference Guide

Please read the Instructions Manual carefully before using your new washing machine

(We reserve the right to make technical modifications)

Whirlpool is a registered trademark of Whirlpool USA

Programme selector

To select a programme, turn the knob.

The corresponding symbol will appear on the display.

To change the programme once the wash cycle has

started, turn the knob to “ ” and set the new

programme.

When the knob is on “ ” three dashes blink on the

display.

Start button

When you press this button, it lights up and the wash

cycle starts. At the end of the wash cycle the light will

turn off and END will appear on the display.

On/Off button

This button switches the washing machine on/off.

Changing or interrupting the programme during the wash cycle

Turn the programme selector to the

“”

position.

Select the new programme (with temperature), any options and

another spin speed if you want.

Press the “

Start

” button again.

If the “On/Off” button is pressed, no

detergent has to added.

Cancelling a programme before the end

Turn the programme selector to the

“”

position.

Set the programme selector to programme setting “Drain/Spin.

Press the

“Start”

button to start the “Drain/Spin” cycle.

Display

Shows the wash cycle sequence.

Options

Selecting any option the indication lights up .

When the combination of programme, additional options and

temperature is not possible, the indication lights switch off automatically.

Unsuitable combinations of options are deselected automatically.

Start Delay

Delays the start of the wash cycle by 1 to 16 hours. Each time the

button is pressed, the start of the wash cycle is delayed by 1 hour.

Prewash

Only for heavily soiled laundry (e.g. sand, granular dirt). Programmes

with Prewash last approx. 15 minutes longer.

Intensive rinse button

More water and a longer time in rinse cycle is added.

The intensive rinse function is especially suitable for areas with

particularly soft water, for baby clothes and to help people with

allergies.

Rinse Hold

The laundry remains in the last rinse water without progressing to the

final spin cycle to avoid creasing and prevent colours from changing.

This option is particularly recommended for the programme

“Synthetics” or “Delicate”.

This function is particularly useful if you want to postpone spinning

to a later time or when you do not wish to spin the clothes.

To terminate the “Rinse Hold” option (in synthetic and wool

programmes only)o

Press the “Rinse hold” button again; the load will be spun according

to the selected programme.

If you do not wish to spin the clothes, turn the programme selector

knob to the drain programme, after pressing the “No Spin” button.

Spin

Every programme has an automatic predefined maximum spin speed.

Press the button to select a different spin speed.

If the spin speed “0” is selected, the final spin is cancelled. The water is

drained out only.

Quick wash

For quick, economical washes. Especially suitable for small, lightly

soiled loads. This option can be used with Cotton and Synthetic

programmes. Selecting this function allows you to shorten the wash

cycle time depending on the temperature.

Note:

reduce the detergent quantity.

Power and water consumption data

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Programme Duration

approx.

(hours : minutes)*

Prewash cycle increases programme duration by

approx. 15 minutes. Consumption values were

measured in normalized conditions in compliance

with Standard IEC/EN 60 456.

Consumption data in the home may vary with

respect to the values in the table in relation to the

water supply pressure and temperature, the load

and the type of wash.

* The remaining time display may differ from

the values given in the table since it depends

on the conditions of use in the home.

** To reduce the water temperature, some cold

water is added at the end of the main wash

cycle, before the pump drains the water out.

Cotton 90 5.0 49** 1.20 1:56

Cotton 60 5.0 49 0.95 2:13

Cotton 40 5.0 49 0.45 2:00

Synthetics 60 2.5 42 0.80 1:44

Synthetics 40 2.5 42 0.43 1:34

Synthetics short 30 2.0 30 0.30 0:40

Delicate 30 1.5 47 0.45 0:53

Wool 40 1.0 58 0.45 0:48

Handwash 30 2.0 55 0.25 0:51

3GB20104.fm Page 4 Wednesday, July 7, 2004 2:18 PM

Black process 45.0° 150.0 LPI

1 2 3 4

What to do if 3
Quick Reference Guide 4

Comments to this Manuals

No comments

Whirlpool AWZ 410 Instruction for Use Page 4

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool AWZ 410