Whirlpool AWZ 475 Instruction for Use download pdf (Page 11)

GB 11

Description of red indications

The red light

will go on

(if fitted to the

appliance)

Alphanumeric

indications shown

on the display

(on models fitted

with them)

Description

Cause

Solutions

“Water Tap

Closed”

E00

The appliance has insufficient or no water supply.

The

“Start”

light goes on.

Check that:

•

The water tap is fully open and the water pressure

is sufficient.

•

The water supply hose is kinked.

•

the mesh filters of the water supply could be

blocked (see “Care and maintenance”.

•

The water hose is frozen up.

When the problem has been resolved, re-start the

programme by pressing the

“Start”

button. If the

fault occurs again, contact the After-Sales Service

[see next chapter).

“Clean Pump”

E01

The water is not pumped out of the washing

machine. The appliance stops in mid programme;

unplug the appliance and check if:

•

there are kinks in the drain hose.

•

the filter or pump is blocked (see chapter

“Removing The Filter/Draining Residual Water”;

make sure the water has cooled before

draining the appliance).

•

the water in the water inlet hose is frozen.

When you have resolved the problem, turn the

programme selector to “Off/O” to reset the

appliance; next re-start the desired programme. If

the fault occurs again, contact the After-Sales

Service [see next chapter).

“Electrical module fault”

“Service”

Door locking error

E02

E03

Unplug the appliance and turn the programme

selector to

“Off/O”

, then turn the appliance ON

again. Select the “Drain/Spin” programme and re-

start within 15 seconds.

“Fod”

E04

Turn the appliance OFF by turning the programme

selector to

“Off/O”

; Open and close the door again

with more force then reselect the programme and

press

“Start”

If any of the faults described above persists, unplug

the appliance, turn off the water supply and contact

our After-Sales Service (see next chapter).

30120039GB.fm Page 11 Thursday, January 8, 2009 6:16 PM

Black process 45.0° 150.0 LPI

1 2 ... 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Whirlpool AWZ 475 Instruction for Use Page 11

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool AWZ 475