Whirlpool TWO SPEED AUTOMATIC WASHERS Specifications download pdf (Page 5)

PORTABLE ONE-FAUCET CONNECTION

NOTE: Make sure the lid is closed before

moving the washer.

•

Use the hose connector provided with the washer

for a one-faucet connection.

•

Set the Temperature Selector to Warm/Warm or

to Warm/Cold.

•

Attach the hose connector to the faucet adapter by

pulling down on the locking collar while lifting up

on the connector until it snaps into place.

•

Slowly turn the water faucet on all the way.

•

Pull the electrical power cord from the storage

area in the back of the washer. Plug the power

cord into a 3 prong grounded outlet.

Water temperature adjustment:

Adjust water temperature as follows:

•

Wash Water: Adjust faucets for wash water

temperature prior to the fill for wash.

•

Rinse Water: Adjust faucets for temperature prior

to fill for rinse.

NOTE: Always use cold rinse water for permanent

press fabrics.

WASHER INSTALLATION

ELECTRICAL REQUIREMENTS

Hose connector

Locking collar

Water flow

button

Faucet adapter

wWARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result

in death, fire, or electrical shock.

A 120-volt, 60-Hz., AC-only, 15-or 20-ampere fused

electrical supply is required. Time-delay fuse or circuit

breaker is recommended.

GROUNDING INSTRUCTIONS

For your personal safety, this washer must be

grounded. Check with a qualified electrician or

serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the

plug provided with the appliance - if it will not fit the

outlet, have a proper outlet installed by a qualified

electrician.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Whirlpool TWO SPEED AUTOMATIC WASHERS Specifications Page 5

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool TWO SPEED AUTOMATIC WASHERS