Whirlpool WWDC 9614 User's Guide Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
- Timer drying mode:
Press button Drying settings repeatedly to set timer drying
mode. After cycling through all the automatic drying levels,
continue pressing button Drying settings until the desired
time is displayed.
Values from 210 to 30 minutes are settable.
N.B.: always allow a cooling down period after drying before
opening the door.
5. USING THE CORRECT AMOUNT OF DETERGENT. Pull out
the tray and pour detergent into the relative compartments
as described in “Detergent dispenser”. This is only necessary
when using a wash only or a wash + dry programme.
6. DELAYING THE START OF A PROGRAMME. To set a
programme to start at a later time, see the section “Options
and Functions”.
7. STARTING A PROGRAMME.
Press the START/PAUSE button. The relative indicator lamp
illuminates, the door locks and the door open symbol
extinguishes. To change a programme while a cycle is in
progress, press START/PAUSE to pause the washer dryer (the
START/ PAUSE lamp ashes amber slowly); then select the
required cycle and press START/PAUSE again. To open the
door while a cycle is in progress, press START/PAUSE; the door
may be opened if the symbol lights. Press the START/
PAUSE button again to resume the programme from where it
was paused.
8. CANCELLING A RUNNING PROGRAMMEIF NECESSARY
Press and hold the button until the washer dryer stops.
If the water level and temperature are low enough, the door
unlocks and may be opened.
The door remains locked if there is water in the drum. To
unlock the door, switch the washer dryer on, select the SPIN &
DRAIN programme and turn the spin function o by setting
the spin speed to 0. The water is emptied and the door
unlocks at the end of the programme.
9. SWITCHING THE WASHER DRYER OFF AT THE END OF A
PROGRAMME.
At the end of the cycle, the message “END” is shown on the
display. The door can only be opened when the symbol
lights. Check that the door unlocked symbol is lit, then open
the door and take out the laundry.
Press to switch the washer dryer o. To save energy, if the
washer dryer is not switched o manually with the
button, it turns o automatically approximately 30 minutes
after the end of the programme.
Leave the door ajar to let the interior of the washer dryer dry.
Page view 3
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments