Whirlpool Energy Smart 188414 User Manual download pdf (Page 3)

IMPORTANT: Do not remove any permanent instructions,

labels, or the data label from outside of the water heater or

on the inside of panels.

• Remove exterior packaging and place installation

components aside.

• Do not remove the envelope bag containing the

water heater literature from the side of the water

heater.

• Inspect all parts for damage prior to installation and

start-up.

• Completely read and understand all instructions

before attempting to assemble and install this product.

• Replace this manual inside the envelope bag when

installation is complete.

• After installation, dispose of packaging material in

the proper manner.

INSTALLING YOUR WATER HEATER

Consumer Information

This water heater should be installed in accordance

with the local code authority having jurisdiction, the

power company or electric utility, and this installation

manual. In the absence of local code requirements,

follow the regulations set forth in the latest edition of the

National Electric Code, NFPA70. This is available from

the following:

National Fire Protection Agency

1 Batterymarch Park

Quincy, MA 02269

American National Standards Institute

1430 Broadway

New York, NY 10018

Check your phone listings for the local authorities

having jurisdiction over your installation.

Consumer Responsibilities

This manual has been prepared to acquaint you with

the installation, operation, and maintenance of your elec-

tric water heater and provide important safety information

in these areas.

We urge you to read all of the instructions thoroughly be-

fore attempting the installation or operation of this water

heater. This manual should be kept for future reference.

The manufacturer of this water heater will not be liable for

any damages caused by failure to comply with the instal-

lation and operating instructions outlined in this manual.

If you lack the necessary skills required to properly

install this water heater or you have difficulty following

the directions, you should not proceed but have a

qualified person perform the installation of this water

heater.

Examples of a qualified personnel include:

licensed plumbers, authorized electric company person-

nel, and authorized service person.

Massachusetts code requires this water heater to be

installed in accordance with Massachusetts Plumbing

and Fuel Code 248-CMR 2.00: State Plumbing Code and

248-CMR 5.00.

A data plate identifying your water heater can be found

adjacent to the energy smart module. When referring to

your water heater always have the information listed on

the data plate readily available, to include the model and

serial number.

Retain your original receipt as proof of purchase.

Insulation Blankets

The use of an insulation blanket on this water heater is

not needed nor recommended. The purpose of an insula-

tion blanket is to reduce the standby heat loss encoun-

tered with storage tank heaters. Your water heater meets

or exceeds the National Appliance Energy Conservation

Act standards with respect to insulation and standby loss

requirements, making an insulation blanket unnecessary.

Unpacking the Water Heater

Removing Packaging Materials

WARNING

Excessive Weight Hazard

Use two or more people to move and install

water heater.

Failure to do can result in back or

other injury.

1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments

Whirlpool Energy Smart 188414 User Manual Page 3

Comments to this Manuals

Related products and manuals for Water boiler Whirlpool Energy Smart 188414