Whirlpool WHES20 Troubleshooting Guide download pdf (Page 17)

Program the Water Softener -- Model WHES20

UP button

DOWN Button

PROGRAM button

RECHARGE button

Display

PRESS TO SCHEDULE

HOLD TO ST ART

−

PROGRAM

RECHARGE

Figure 10

If you have questions about installation, programming, operating and routine maintenance...

call 1--866--986--3223, Monday -- Friday, 8 am to 9 pm, EST.

When the transformer is plugged into the electrical outlet, a model code and a test number (example:

s3.0), begin to flash in the faceplate display. Then, 12:00 PM and the words “PRESENT TIME” begin

to flash.

NOTE: If -- -- -- -- shows in the display, press the UP

or DOW N

−

button until LE20

shows in the display. Then, pr ess the

PROGRAM button to set, and change to the

flashing “PRESENT TIME” display.

Set Time of Day

If the words “PRESENT TIME” do not show in the display, press the PROGRAM button until they

do.

1. Press the

Up or

−

Down buttons to set the present time. Up moves the display ahead; down

sets the time back.

PRESENT TIME

Be sure AM or PM is correct.

NOTE: Press buttons and quickly release to slowly advance the display. Hold the buttons

down for fast advance. This procedure applies for all following settings.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 38 39

No comments

Whirlpool WHES20 Troubleshooting Guide Page 17