Whirlpool 1188695 Use and Care Guide download pdf (Page 4)

INSTALLATION REQUIREMENTS

Electrical Requirements

Electrical Connection

To properly install your air purifier, you must determine the type of

electrical connection you will be using and follow the instructions

provided for it here.

■ The air purifier should be connected to a 115 V, 60 Hz, 15- or

20-amp fused 3 prong grounded outlet.

■ The use of a time-delay fuse or time-delay circuit breaker is

recommended.

Location Requirements

■ You will need a level surface at least 6" (15.2 cm) from heat

sources such as ranges or heaters.

■ Do not block air openings or place the air purifier on a soft

surface such as a bed or sofa.

■ Operate indoors only.

AIR PURIFIER USE

NOTE: Before operating the air purifier, record the date of installation on the HEPA filter. Under normal conditions, the HEPA filter should

be replaced annually, and the pre-filter should be replaced every 3 months. To remove and replace either filter, see “Filter Replacement”

in the “Air Purifier Care” section.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in

death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

A. 6" (15.2 cm) min. clearance

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Whirlpool 1188695 Use and Care Guide Page 4