Whirlpool ACE 010 IX Instruction for Use

1ACE 010www.whirlpool.com

10CLEANING AND MAINTENANCE 1. BEFORE PERFORMING ANY CLEANING operations, leave the appliance to cool down and unplug from the mains socket. 2. DO NOT

11CLEANING THE BOILER OUTLET ABOUT EVERY 300 COFFEES, the espresso boil-er outlet must be cleaned as follows:1. MAKE SURE the ap-pliance is not hot

12NO ESPRESSO COFFEE IS DELIVERED No water in the tank The holes in the fil-ter holder spouts are blocked. The espresso boiler outlet is blocked The

13THE COFFEE FROTH IS TOO LIGHT (delivered from the spout too fast)PROBLEMPOSSIBLE CAUSESOLUTION The ground coffee is not pressed down firmly enoughT

14

15

16Whirlpool Sweden ABAU 4619- 694- 66161ENVIRONMENTAL HINTSTHE PACKING BOX may be fully recy-cled as confi rmed by the recy-cling symbol. Follow local

2INSTALLATIONPRIOR TO CONNECTINGENSURE THAT THE APPLIANCE IS NOT DAMAGED. AFTER CONNECTINGTHE EARTHING OF THIS APPLIANCE is compulso-ry. The manufac

3IMPORTANT SAFETY INSTRUCTIONSDO NOT HEAT, OR USE FLAMMABLE LIQUIDS in or near the appliance. Fumes can create a fi re hazard or explosion.DO NOT LEAV

4ACCESSORIES & PARTSq CONTROL PANEL w STEAM KNOB e WATER TANK r POWER CABLE t STEAM/HOT WATER TUBE y DRIP MESH u DRIP TRAY i CAPPUCCINO MAKER o NO

512 FILLING THE WATER TANK 1. TURN THE APPLIANCE on by pressing the ON/OFF BUTTON AND ATTACH THE FILTER HOLDER TO THE APPLI-ANCE WITHOUT ADDING GROUN

6121. AFTER PREHEATING the appliance as described above, place the ground coff ee fi lter in the fi lter holder, making sure the projection is correctl

712HOW TO PREPARE ESPRESSO COFFEE USING PODS 1. PREHEAT THE APPLIANCE as described in the sec-tion “PREHEATING THE COFFEE UNIT”, making sure the fi lt

8HOW TO MAKE CAPPUCCINO COFFEE 1. PREPARE THE ESPRESSO COFFEES as described in the previous paragraphs, using suffi ciently large cups. 2. PRESS THE S

9IMPORTANT: always clean the cappuccino maker after use. Proceed as follows: 1. DISCHARGE A LITTLE STEAM for a few seconds by rotat-ing the steam kn