Whirlpool 9BRAKB9002B Instruction for Use download pdf (Page 9)

EN9

MAINTENANCE

WARNING:

- use safety gloves.

- disconnect the appliance from the mains power supply.

Grease lters:

metal grease lters have an unlimited life and should be washed once a month either by hand or in a

dishwasher at a low temperature and with a short cycle.

Washing in a dishwasher can cause grease lters to turn white, but this in no way aects eciency.

a. press the handle to remove the lter;

b. remove it.

Wash the lter and leave it to dry, proceeding in reverse order to ret it.

Halogen lamps:

1. Disconnect the hood from the household power supply.

2. Wear gloves.

3. Remove the grease lters.

4. Remove the burnt-out lamp by unscrewing it from the lampholder and screw in a new one.

Lamp Power(W) Socket Voltage(V)

Dimension

(mm)

ILCOS D Code

(according IEC 61231)

28 E14 230

(Light Center

Length)

HSGSB/C/UB-28-

230-E14-67

5. Ret the grease lters.

Active carbon lter

(lter hoods only):

The carbon lter must be cleaned once a month in a dishwasher at the

highest temperature, using a normal dishwasher detergent. Wash the

lters on their own.

After washing, reactivate the carbon lter by drying it in the oven at

100°C for 10 minutes.

Change the carbon lter every 3 years.

Fitting the carbon lter:

1. Remove the grease lter.

2. Remove the lter holder by turning the knobs 90°.

3. Fit the carbon lter “i” in the lter holder “h”.

Reverse the above procedure to re-t the lter holder and grease lter.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Whirlpool 9BRAKB9002B Instruction for Use Page 9