Whirlpool 980 Series User Manual download pdf (Page 14)

SETTING THE CONTROLS

• You can press CANCEUDRAIN again to

stop the drain immediately. Remember to

drain the dishwasher again before starting

a new cycle.

NOTE: A small amount of water remaining

in the dishwasher is normal.

To clear the indicators:

Press CANCEL/DRAIN before starting the

dishwasher to clear all cycle and option

selections.

Selecting cycle options

You can press an Option pad after the

dishwasher starts as bng as the cycle is not

past the point that the option is used. For

example, you can press AIR DRY any time

before the DRYING indicator glows.

After a wash cycle, the dishwasher

remembers the options used and uses the

same options in the next wash cycle unless

new options are selected or the CANCEL/

DRAIN pad is pressed.

HiGH TEMP WASH

When HIGH TEMP WASH is selected, the

dishwasher heats the water during

the main wash of the CHINA/

CRYSTAL, LOW ENERGY,

NORMAL , and HEAVY cycles.

Heating the water helps improve

washing results. The POTS-N-PANS cycle

automatically uses HIGH TEMP WASH.

LOW ENERGY RINSE

When LOW ENERGY RINSE is selected

the dishwasher does not heat the

water during the final rinse of

CHINA/CRYSTAL, LOW

ENERGY, NORMAL, HEAVY,

and POTS-N-PANS cycles.

ENERGY

RINSE

NOTE: LOW ENERGY RINSE saves

energy, but dishes take longer to dry and

some spotting can occur. For best rinsing

and drying results, use a liquid rinse agent.

AIR DRY

When AIR DRY is selected, the air in the

H

dishwasher is not heated during

the “dry” portion of a cycle. Using

AIR DRY helps save energy, but

dishes take longer to dry arid

some spotting can occur. Some

items (such as plastics) may need towel dry

ing. For best drying, use a liquid rinse agent.

NOTE: The dishwasher automatically heats

the air in the dishwasher during the “dry”

portion of the cycle unless you select AIR

DRY.

Changing a cycle or an option setting

During the first minute

of a cycle

1. Press new Cycle and/or Option pads.

2. Check the detergent dispensers. They

must be filled properly for the new cycle.

After the first minute

of a cycle

1. Press CANCEL/DRAIN. A 2-minute drain

cycle starts. Wait for drain cycle to finish.

2. Press a new Cycle pad.

3. If desired, press one or more Option pad(s).

4. Check the detergent dispensers. They

must be filled properly for the new cycle.

14

1 ... 13 14 15 ... 27

Comments to this Manuals

No comments