Whirlpool ADG 5730 FD Instruction for Use download pdf (Page 8)

How to set water hardness in order to always assure the best cleaning results

Water hardness should be set only before the first wash or if water hardness has been changed.

- Press and hold together Program and buttons for minimum 3 seconds.

- The current water hardness setting will be visible on the display.

- Press the Program button to increase setting. Value range goes from 1 to 7 (when the level reaches 7, the next

press of the start button will set the level back to 1).

- Wait 30 seconds (control panel switches off) or press Start/Resume button to save setting.

Water hardness level is factory set for medium-hard water (level 4).

Detergents

When powder or gel detergent is used, regeneration salt must be added and water hardness level must be set

as indicated in the table on the right.

Also, when tablets which include salt functionality are used, regeneration salt still must be added.

1. salt reservoir

2. rinse aid dispenser

3. detergent dispenser

4. racks system

5, 6, 7, 8. available functions on the panel

9. filters

10. spray arms

First time use

1. Ask your water supply company what the water hardness is...

2. ...enter this value

on your dishwasher

SALT

required

German

degrees °dH

French

degrees °fH

English

degrees °eH

Water

hardness level

Insert value is

shown in the display

0 -5 0 - 9 0 - 6.3 Soft 1 NO

6 - 10 10 - 18 7 - 12.6 Medium 2

YES

11 - 15 19 - 27 13.3 - 18.9 Average 3

16 - 21 28 - 37 19.6 - 25.9 Medium-hard 4

22 - 28 38 - 50 26.6 - 35 Hard 5

29 - 35 51 - 63 35.7 - 44.1 Very hard 6

36 - 50 64 - 90 44.8 - 62.4 Extremely hard 7

1 2 3 4 5 6 7 8 9 ... 20

Comments to this Manuals

No comments

Whirlpool ADG 5730 FD Instruction for Use Page 8

Comments to this Manuals

Related products and manuals for Dishwashers Whirlpool ADG 5730 FD